Converting 4602+/4610Sw/4620Sw/4621Sw Ip Telephones - Avaya 4600 Series Installation Manual

Converting 4602+/4610SW/4620SW/4621SW IP Telephones

An H.323 IP telephone can be either in use with possible customized settings or out of the box
with factory default settings. An out of the box telephone requires accessing the manual
programming mode early in the process and setting the Signaling Protocol Identifier (SIG)
parameter to "SIP." Converting to SIP early avoids having to first load H.323 software, log in,
and then invoke the "in use" process to load the SIP software.
Note:
For information about the SIG parameter, see "Choosing the Right Application
Note:
File and Upgrade Script File" in the 4600 Series IP Telephone LAN Administrator
Guide (Document Number 555-233-507). For information on setting or changing
the SIG parameter, see
Table 1: H.323 to SIP and SIP to H.323 Conversion Chart
Environment
H.323-centric
H.323-centric
Signaling Protocol Identifier
To convert this To this type
type of telephone of telephone
H.323 in use SIP
H.323 factory set SIP
Converting Software on Avaya 4600 Series IP Telephones
Then:
Perform the Mute SIG procedure to
change the SIG parameter value from
"default" to "2" (SIP)." For information,
see Signaling Protocol Identifier
page 79.
Press * to save the SIG parameter
change. Restart the telephone as
covered in
page 78.
Connect the telephone to a power
source and to the network.
As soon as you see the DHCP prompt,
press * to enter manual programming
mode. Press # multiple times to accept
the existing values until the telephone
displays "Enter command.".
Perform the Mute SIG procedure and
change the value from "default" to "2"
(SIP).
Press * to save the SIG parameter
change. Restart the telephone as
covered in
page 78.
on page 79.
Restart the Telephone
Restart the Telephone
Issue 7 July 2008
on
on
on
1 of 2
43