Information About The Appliance; Eu Declaration Of Conformity; Intended Use; Regarding These Instructions - Buderus Logano plus GB402 Installation And Maintenance Instructions Manual

2

Information about the appliance

2 Information about the appliance
2.1

EU Declaration of Conformity

The design and operation of this product conform to the
European Directives and the supplementary national
requirements. Its conformity is demonstrated by the
CE designation. You can call up the Declaration of
Conformity for this product on the internet at
www.buderus.de/konfo or request a copy from your local
Buderus sales office.
2.2

Intended use

The Logano plus GB402 is designed for conventional use
as a gas condensing boiler for DHW and central heating.
Only gas supplied by the public gas supply utility can be
used.
Observe the details on the type plate and the
specification ( Chapter 2.7) to ensure correct use.
2.3

Regarding these instructions

These installation and maintenance instructions contain
important information for the safe and appropriate
installation, commissioning and servicing of this gas
condensing boiler.
These installation and maintenance instructions as well as
the service instructions are designed for contractors who,
through their technical training and experience, are
knowledgeable in handling heating systems and gas
installations.
The following documents are available for the Logano
plus GB402:
• Operating instructions
• Operating instructions, MC10 control unit
• Installation and maintenance instructions
• Operator's log
• Technical guide
The above documents are also available for downloading
via the Buderus website.
Please contact us with suggestions for improvement or if
you notice any errors. For contact addresses and our
internet address, see the back cover of this document.
6
2.4

Tools, materials and equipment

For boiler installation and maintenance you will need the
following:
• Standard tools used for central heating, gas and water
installation, plus set of a metric open-ended spanners
and Allen keys.
• The RC35 programming unit as a monitoring device for
commissioning, inspecting and servicing the boiler.
A PC with Buderus Logamatic
ECO-Soft4000/EMS and a service key can
also be used as a monitoring device.
The following may also prove useful:
• 5 pipes (approx. R 1¼ ", approx. 900 mm long) as
supports on which to roll the boiler into place
• Cleaning panels and/or chemical cleaning agent for
wet cleaning (available as accessories)
Logano plus GB402 - Subject to technical modifications!