Xerox ColorQube 8700 System Administrator Manual page 67

Configuring Xerox Secure Access
1. On the Xerox Access Setup page, under Action, next to Xerox Secure Access Setup, click Edit.
2. Configure the remote server. For details, see the instructions provided with your server hardware.
Once the server is configured, it communicates with the printer and automatically completes the
configuration process.
3. To configure communication manually, personalize instructional windows, and review accounting
options, click Manually Configure.
To return to the Xerox Access Setup page, click Pending Remote Server Setup.
4.
5. To configure any settings that are marked in red text as Required; Not Configured, in the table at
the bottom of the page, click Edit.
Manually Configuring Xerox® Secure Access Settings
®
If you are using Xerox
communication, personalize instructional windows, or review accounting options.
Before you begin:
®
Configure the Xerox Secure Access authentication server.
®
1. On the Xerox Access Setup page, click Edit next to Xerox
Click Manually Configure.
2.
3. Under Server Communication, select the address type and port number. Options are IPv4 Address or
Host name.
4. Type the appropriately formatted address and port number. The default port number is 443.
5. In the Path field, type the HTTP path public/dce/xeroxvalidation/convauth.
6. Under Device Log In Methods, select an option:
 ®
Xerox Secure Access Device Only allows users to access the printer only using the card reader.
 ®
Xerox Secure Access Device + alternate on-screen authentication method allows users to
access the printer by logging in at the control panel.
7. When Network Accounting is configured, the printer can obtain user accounting information from
the Authentication server. Select Automatically apply Accounting Codes from the server to reduce
the number of screens that appear when a user logs in at the control panel.
If you want users to provide an accounting code at the control panel, select User must manually
enter accounting codes at the device.
8. Create login instructions for users by typing text in the fields under Device Instructional Blocking
Window.
a. In the Window Title field, type text that appears as a title at the top of the touch screen.
b. In the Instructional Text field, type instructions that appear below the title.
Note: If the Title and Prompt are configured on the Xerox
instructional text that you type is ignored.
9. Click Save to apply the new settings or Undo to retain the previous settings.
Secure Access for authentication, you can manually configure remote server
®
Secure Access Setup.
®
Partner authentication server, then any
ColorQube 8700/8900 Color Multifunction Printer
System Administrator Guide
Security
67