Removing Wiper Blades; Installing Wiper Blades - Mercedes-Benz 2007 E 320 BLUETEC Operator's Manual

Vehicles with KEYLESS-GO*
Turn off the engine ( page 64).
With the driver's door closed, the start-
er switch is now in position 1.
Turn combination switch to wiper
setting U ( page 58).
With wiper arms in the vertical position,
open the driver's door.
The starter switch is set to position 0,
same as SmartKey removed from start-
er switch.
Turn combination switch to wiper
setting 0 ( page 58).

Removing wiper blades

!
Do not pull on the wiper blade inserts. They
could tear.
Fold the wiper arm forward until it
snaps into place.
Turn the wiper blade at a right angle to
wiper arm.
Slide the wiper blade sideways out of
the retainer.
Practical hints
Replacing wiper blades

Installing wiper blades

Slide the wiper blade onto wiper arm
until it locks in place.
Rotate the wiper blade into position
parallel to the wiper arm.
Fold the wiper arm backward to rest on
the windshield. Make sure you hold on
to the wiper when folding the wiper arm
back.
451