Mercedes-Benz 2007 E 320 BLUETEC Operator's Manual page 448

Low beam bulb (halogen headlamps
only)
Turn housing cover 1 counterclock-
wise and remove it.
Turn bulb socket 4 with the bulb
counterclockwise and remove it.
Pull the bulb out of bulb socket 4.
Press the new bulb gently into bulb
socket 4.
Place bulb socket 4 back into the
lamp and turn it clockwise until it en-
gages.
Align housing cover 1 and turn it
clockwise until it engages.
High beam bulb/high beam flasher
bulb (halogen headlamps)/high beam
flasher bulb (Bi-Xenon* headlamps)
Turn bulb socket 2 with the bulb
counterclockwise and remove it.
Pull the bulb out of bulb socket 2.
Press the new bulb gently into bulb
socket 2.
Place bulb socket 2 back into the
lamp and turn it clockwise until it en-
gages.
Practical hints
Replacing bulbs
Front turn signal lamp bulb
Turn bulb socket 5 with the bulb
counterclockwise and remove it.
Press gently onto the bulb and turn
counterclockwise out of bulb
socket 5.
Press the new bulb gently into bulb
socket 5 and turn clockwise until it
engages.
Place bulb socket 5 back into the
lamp and turn it clockwise until it en-
gages.
447