Mercedes-Benz 2007 E 320 BLUETEC Operator's Manual page 47

Getting started
Adjusting
Easy-entry/exit feature
This feature allows for easier entry into and
exit from the vehicle. When entering and
exiting the vehicle, the steering wheel is in
its uppermost position.
The easy-entry/exit feature can be activat-
ed or deactivated in the Convenience
menu of the control system ( page 178).
Warning!
You must make sure no one can become
trapped or injured by the moving steering
wheel when the easy-entry/exit feature is
activated.
To stop steering wheel movement, do one of
the following:
Move steering wheel adjustment stalk
( page 45).
Press one of the memory buttons
( page 135).
46
Do not leave children unattended in the ve-
hicle, or with access to an unlocked vehicle.
Children could open the driver's door and
unintentionally activate the easy-entry/exit
feature, which could result in an accident
and/or serious personal injury.
sub-
With the easy-entry/exit feature activated,
the steering wheel will return to its last set
position when you:
G
close the driver's door with the ignition
switched on
or
insert the SmartKey into the starter
switch or press the KEYLESS-GO*
start/stop button ( page 39) once
with the driver's door closed
i
The last set steering wheel position is stored
when
the ignition is switched off ( page 63)
the position is stored in memory
( page 135)
With the easy-entry/exit feature activated,
the steering wheel tilts upwards when you:
remove the SmartKey from the starter
switch
or
open the driver's door with the
SmartKey in starter switch position 0
or 1 or the KEYLESS-GO* start/stop
button ( page 39) in position 1
i
If the current position for the steering wheel
is in the uppermost tilt position, the steering
wheel will no longer be able to move upward
when the easy-entry/exit feature is activated.
The adjustment procedure is briefly interrupted
when the engine is started.