Mercedes-Benz 2007 E 320 BLUETEC Operator's Manual page 140

Daytime running lamp mode
Turn the exterior lamp switch to
position M or U.
When the engine is running, the low
beam headlamps are automatically
switched on.
In low ambient light conditions, the fol-
lowing lamps will switch on additional-
ly:
Tail and parking lamps
License plate lamps
Side marker lamps
i
With the daytime running lamp mode activat-
ed and the engine running, you cannot switch off
the low beam headlamps manually.
Canada only:
The daytime running lamp mode is manda-
tory and therefore in a constant mode.
i
With the exterior lamp switch in
position M or U, you cannot switch on the
high beam headlamps.
The high beam flasher is available at all times.
For nighttime driving turn the exterior lamp
switch in position B to permit activation of
the high beam headlamps.
When the engine is running, and you shift
from a driving position to position N or P,
the low beam headlamps will switch off
with a 3 minute delay.
Controls in detail
When the engine is running, and you
turn the exterior lamp switch to
position C, the parking lamps and
the side marker lamps switch on addi-
tionally.
turn the exterior lamp switch to
position B, the manual headlamp
mode has priority over the daytime run-
ning lamp mode.
The corresponding exterior lamps
switch on ( page 137).
Lighting
139