Lighting; Exterior Lamp Switch - Mercedes-Benz 2007 E 320 BLUETEC Operator's Manual

Lighting

For information on how to switch on the
headlamps and use the turn signals, see
"Switching on headlamps" ( page 56)
and see "Turn signals" ( page 57).
i
If you drive in countries where vehicles drive
on the other side of the road than the country
where the vehicle is registered, you must have
the headlamps modified for symmetrical low
beams. Relevant information can be obtained at
your authorized Mercedes-Benz Center.
i
Vehicles equipped with active Bi-Xenon*
headlamps:
The active Bi-Xenon headlamps monitor your
steering angle and driving speed, then automati-
cally shift their beams to either side to better fol-
low the curvature of the road ahead, increasing
usable illumination over conventional head-
lamps.

Exterior lamp switch

Exterior lamp switch
Controls in detail
1 ‚ Standing lamps, left (turn left two
stops)
2 ˆ Standing lamps, right (turn left
one stop)
3 M Off
Daytime running lamp mode
( page 139)
4 U Automatic headlamp mode
Daytime running lamp mode
( page 139)
5 C Parking lamps (also side marker
lamps, tail lamps, license plate
lamps, instrument panel lamps)
6 B Low beam headlamps or high
beam headlamps when the com-
bination switch is pushed for-
ward. The tail lamps, license
plate lamps, side marker lamps,
parking lamps and instrument
panel lamps also come on.
7 ‡ Front fog lamps
8 † Rear fog lamp
Lighting
137