Settings Menu - Mercedes-Benz 2007 E 320 BLUETEC Operator's Manual

Controls in detail
Control system

Settings menu

In the Settings menu there are two func-
tions:
The function To reset: Press reset
button for 3 seconds , with which you
can reset all the settings to the original
factory settings.
A collection of submenus with which
you can make individual settings for
your vehicle.
Press button è or ÿ repeatedly
until the Settings menu is seen in the
multifunction display.
166
The following settings and submenus are
available in the Settings menu:
Function
Resetting all settings
Submenus in the Settings menu 167
Instrument cluster submenu
Time/date submenu
Lighting submenu
Vehicle submenu
Convenience submenu
Resetting all settings
You can reset all the functions of all sub-
menus to the factory settings.
Page
Press the reset button in the instru-
166
ment cluster ( page 148) for approxi-
mately 3 seconds.
169
In the multifunction display you will see
171
the request to press the reset button
173 again to confirm.
176
Press the reset button again.
178
The functions of all the submenus will
reset to factory settings.
i
The settings you have changed will not be re-
set unless you confirm the action by pressing the
reset button a second time. After approximately
5 seconds, the Settings menu reappears in the
multifunction display.
For safety reasons, the Headlamp mode func-
tion in the Lighting submenu is not reset while
driving.