Mercedes-Benz 2007 E 320 BLUETEC Operator's Manual page 183

Controls in detail
Control system
If the telephone is on:
The telephone will then search for a
network. During this time the multi-
function display is empty.
As soon as the telephone has found a
network, READY appears in the multi-
function display.
This standby message indicates that your
telephone is ready for use and you can op-
erate it using the control system.
182
Answering a call
When your telephone is ready to receive
calls, you can answer a call at any time. In
the multifunction display you will then see
the message, or if available, the caller ID
(number and name):
Press button s.
You have answered the call. In the mul-
tifunction display you see the length of
the call.
Ending a call or rejecting an incoming
call
Press button t.
Dialing a number from the phone book
If your telephone is ready to receive calls,
you may select and dial a number from the
phone book at any time.
Press button ÿ or è repeatedly
until you see the Tel menu in the mul-
tifunction display.