Controls in detail
Control system
Setting the time (minutes)
This function can only be seen when time
synchronization is switched off.
Move the selection marker with
button æ or ç to the
submenu.
Press button j or k repeatedly
until the message
Time, minute(s)
Press R to confirm
appears in the
multifunction display.
The selection marker is on the minute
setting.
Press button æ or ç to set the
minutes.
Confirm by pressing reset button
( page 148).
172
Setting the date (month)
Move the selection marker with
button æ or ç to the
submenu.
Press button j or k repeatedly
Time/Date
until the message
pears in the multifunction display.
The selection marker is on the month
setting.
Press button æ or ç to set the
month.
Setting the date (day)
Move the selection marker with
button æ or ç to the
Time/Date
submenu.
Press button j or k repeatedly
Set date Month
ap-
until the message
pears in the multifunction display.
The selection marker is on the day set-
ting.
Press button æ or ç to set the
day.
Time/Date
Set date Day
ap-