Practical hints
Replacing wiper blades
Removing wiper blades
Warning!
For safety reasons, switch off wipers and
remove the SmartKey from the starter
switch before replacing a wiper blade. Oth-
erwise, the motor could suddenly turn on
and cause injury.
!
To avoid damage to the hood, the wiper
arms should only be folded forward
when in the vertical position.
386
Turn the SmartKey in the starter switch
to position 1.
Turn combination switch to wiper
G
setting II ( page 53).
With wiper arms in vertical position,
turn the SmartKey in the starter switch
to position 0.
Fold the wiper arms forward until they
engage.
1 Wiper blade
2 Cover
3 Attachment
4 Tab
5 Removing
Press tabs 4 together and tilt wiper
blade 1 to detach tabs 4 on both
recesses of attachment 3.
Wiper blade 1 is released on one end.
Maintaining its tilted position, slide
wiper blade 1 out of attachment 3 in
direction of arrow 5.