Mercedes-Benz 2007 E 320 BLUETEC Operator's Manual page 408

Display
P
Gear selector lever
in Park position
P/N
Shift gear select. lever
to Neutral or Park
PRE-SAFE
inoperative
See Operator's Man.
Possible cause/consequence
You have tried to start the engine with the
KEYLESS-GO* start/stop button with the
gear selector lever not in position P.
You have tried to turn off the engine with the
KEYLESS-GO* start/stop button with the
gear selector lever not in position P.
You have tried to start the engine with the
KEYLESS-GO* start/stop button while the
gear selector lever was in position R or D.
®
PRE-SAFE itself has failed. All other occu-
pant safety systems, such as the air bags, are
still available.
® ®
If ESP and PRE-SAFE malfunction messag-
es are displayed simultaneously, PRE-SAFE
has been deactivated as a result of these
malfunctions. All other occupant safety sys-
tems, such as the air bags, are still available.
Possible solution
Place the gear selector lever in
position P.
Place the gear selector lever in position P
or N. Make sure the brake pedal is de-
pressed.
Visit an authorized Mercedes-Benz Cen-
ter as soon as possible.
®
Practical hints
What to do if ...
407