Lumbar Support; Multicontour Seat - Mercedes-Benz 2007 E 320 BLUETEC Operator's Manual

Installing rear seat head restraints
i
When installing the head restraints, make
sure that:
you place the correct head restraint on the
middle seat. It is marked with the letter "M"
on the outside of the metal bars.
the head restraints engage fully.

Lumbar support

The curvature of the front seats can be ad-
justed to help enhance lower back support
and seating comfort.
1 Adjustment lever
Move adjustment lever 1 in direction
of the arrows until you have reached a
comfortable seating position.

Multicontour seat*

The multicontour seat has a movable seat
cushion and inflatable air cushions built
into the backrest to provide additional lum-
bar and side support.
The seat cushion movement, backrest
cushion height and curvature can be con-
tinuously varied with switches on the right
side of the seat on the driver side, or the
left side of the seat on the passenger side.
Controls in detail
1 Backrest side bolster
2 Backrest center
3 Backrest bottom
4 Seat cushion depth
Switch on the ignition ( page 37).
Seat cushion depth
Adjust the seat cushion depth to the
length of your upper leg using
switch 4.
Backrest contour
Adjust the contour of the backrest to
the desired position using æ or
ç.
Seats
131