Mercedes-Benz 2007 E 320 BLUETEC Operator's Manual page 54

Diesel engine:
Make sure the gear selector lever is set
to P.
Do not depress the accelerator.
Turn the SmartKey in the starter switch
to position 2 ( page 38).
The preglow indicator lamp q in the
instrument cluster comes on.
As soon as the preglow indicator
lamp q goes out, turn the SmartKey
in the starter switch to position 3
( page 38) and release it.
The engine starts automatically.
i
If the engine is at operating temperature,
the preglow indicator lamp q may not stay on
and you can start the engine without preglowing.
Starting with KEYLESS-GO*
Warning!
As long as the SmartKey with KEYLESS-GO
is in your vehicle, the vehicle can be started.
Therefore, never leave children unattended
in the vehicle, as they could otherwise acci-
dentally start the engine.
When leaving the vehicle, always take the
SmartKey with KEYLESS-GO with you and
lock the vehicle. Do not leave children unat-
tended in the vehicle, or with access to an
unlocked vehicle.
You can start your vehicle without the
SmartKey in the starter switch using the
KEYLESS-GO start/stop button on the
gear selector lever.
For information on turning off the engine
with KEYLESS-GO, see "Turning off with
KEYLESS-GO*" ( page 64).
The SmartKey with KEYLESS-GO must be
located in the vehicle.
G
KEYLESS-GO start/stop button
1 USA only
2 Canada only
Gasoline engine:
Make sure the gear selector lever is set
to P.
Depress the brake pedal during the
starting procedure. Do not depress ac-
celerator.
The gear selector lever lock is released.
Getting started
Driving
53