Local Mouse Installation - North Star DIMENSION Service Manual

PERIPHERAL EQUIPMENT INSTALLATION
Local Mouse Devices
Local Mouse only a mouse which uses a serial interface may be
Installation
attached to a workstation. Additionally, the
mouse must conform to EIA RS-232C specifications.
A typical mouse meets this industry specification;
however, if you are in doubt, you should read your
owner's manual.
Procedure : Local Mouse Installation
1. Connect one end of a serial cable to the serial port of the
workstation connector box. Firmly fasten the cable using the
screws attached to the cable connector.
2. Due to diff erences in mouse interface connections, you should
refer to your mouse owner 's manual to complete the installa-
tion procedure.
This completes the hardware installation procedures for
peripheral equipment.
1-34 Technical Manual