North Star DIMENSION Service Manual page 179

SUBASSEMBLY REMOVAL
Workstation 128K/384K Expansion RAM Board
Introduction Use this procedure to remove a 128K or 384K expansion
RAM board from a workstation board.
Procedure: Workstation 128K/384K Expansion RAM Removal
1. Remove the workstation board containing the 128K /384K expansion
RAM board from the central module.
2. Place the workstation board on a flat, well-supported surface.
3. While lifting the corners of the 128K/384K expansion RAM board,
unlock the two nylon standoffs until the memory board is released.
4. Lift the 128K/384K memory board from its socket on the workstation
board, and continue lifting until the two circuit boards are separated.
This concludes the procedure for removing a workstation memory
board.
DIMENSION Service Manual 4-7