North Star DIMENSION Service Manual page 160

TROUBLESHOOTING
Service Diskette #3 (cont.)
Tape The following menu appears when the diagnostic program
Diagnostic TBU.EXE is executed from Service Diskette #3.
Menu
Main Menu
[ F1] Quick System Test
[ F2] Functional Test
[ F3] Extended Functional Test
[ F4] Technician Menu
[ F5) Operator Changes Menu
[ F6] Tape Interchange Test
[ F7] Cartridge Test
[ F8] Display Final Results
[F10] Exit to Operating System
Saving
Errors
The diagnostic program stores errors in a file called
ERROR .LOG. The program never deletes or erases this file.
In order to use the "log errors" feature , enter MANAGER
MODE before starting the diagnostic program TBU.EXE.
The file ERROR.LOG is created and stored in the TAPE
directory.
Periodically check the size of the ERROR.LOG file and
delete it if it is becoming too large or if you no longer
need the information that has been stored.
You may review the contents of the error log file by using
the DOS command:
TYPE ERROR.LOG [Retrn]
3-48 DIMENSION Service Manual