North Star DIMENSION Service Manual page 21

SYSTEM HARD19ARE INSTALLATION
(cont.) Central Module
Procedure :
Central Module Installation and Configuration
7. If you haven't
already done so,
unpack and examine
the workstation
expansion RAM cir-
cuit boards, the
two plastic stand-
offs used with each,
and all workstation
circuit boards.
An expansion RAM
circuit board is
fastened to the
workstation board
in three places:
o By an edge con-
nector which
electrically mates
the two circuit
boards, and
o By the two plastic
standoffs which
physically fasten
the expansion RAM
circuit board to
the workstation
board.
8. Mount the two
plastic standoffs by
pressing them in the
appropriate holes in
the workstation
board.
plastic
standoffs
Technical Manual 1-9