North Star DIMENSION Service Manual page 193

Error Screens and Codes
(cont.) Error Screens
Normal
The following displays are examples of normal
End-of -Test
end-of-test screens that appear after a diskette
Screen
or fixed disk drive test has run to completion.
The drive has passed.
E to list errors
P to display test parameters
X to exit
or
*********************************
**TEST DISKETTE MAY BE WORN OUT**
*********************************
*********************************
***********REJECT DRIVE**********
*******TOO MANY SOFT ERRORS******
*********************************
E to list errors
P to display test parameters
X to exit
Forced
The following display is an example of a forced
End-of-Test
end-of-test screen that appears when a diskette or
Screen
fixed disk drive test is halted before completion
(by typing [Cntrl] and C).
Terminate batch job (Y or N)?
If you type N, the Service Diskette #2 main menu
reappears on your screen. If you type Y, the
DIMENSION Operating System (DOS) command prompt
reappears on your screen.
Note : Before typing [Cntrl] and C to stop a test,
press the space bar to see a summary of the errors
that have occurred during the test.
Technical Manual 4-27