Central Module Installation And Configuration - North Star DIMENSION Service Manual

SYSTEM HARDWARE INSTALLATION
(cont.) Central Module
Procedure :
Central Module Installation and Configuration
17. Use a small slotted
screwdriver to
gently pry open
the door of the
selectable power
line receptacle.
18. Remove the 115VAC
(grey) or 230VAC
(black) fuse assem-
bly from the fuse
receptacle. Replace
this with the
alternate assembly
contained in your
central module fuse
installation kit. holder
When you install the
new fuse assembly,
orient the arrow on
the fuse assembly
in the same direc-
tion as the arrows
on the door of the
power receptacle.
selectable
power line
receptacle
C-
fuse
assembly
== O
fuse
Technical Manual 1-13