North Star DIMENSION Service Manual page 126

DIAGNOSTICS
Service Diskette #1 (cont.)
Central The following screen permits in-depth examination of testing
Board as it occurs. The screen provides extremely detailed
Test information about individual tests and the pass or failure
Analysis modes of those tests. Note that the information contained
Screen on this screen is available and open to interpretation only
by experienced technicians.
***-------------------------------------- ***
Pattern Loop Cnt # failures TD Rev TE - 01/21/86
0000 0000 0001 0000
*** LAST ERROR DETECTED ***
Pattern Loop Cnt Err Type
0000 0000 FOUND VIA I/O REGISTER
i/o addr exp stat act stat i /o addr exp stat act stat
000C 0001 0000
Press any key to continue or
A Return to main menu
B - Set /clear break on error (toggle)
C - Clear Loop and continue testing
L - Loop on Last group until next keystroke
S Single Loop on last group
<ESC> Connect to Automated Test System
3-14 DIMENSION Service Manual