4 BASIC OPERATIONS
USING THE FREQUENCY LOCK
Frequency Lock can lock particular keys and controls
so they are not accidentally operated to change the
frequency.
■ Locking the Main Band Frequency
1 Press [LOCK] (M) to lock the frequency for the main
band.
The "LOCK" (M) LED lights orange.
■ Locking the Sub Band Frequency
1 Press [LOCK] (S) to lock the frequency for the main
band.
The "LOCK" (S) LED lights orange.
Following are the keys that are locked while the frequency
is being locked. Refer to the following table.
4-16
[LOCK](M)
[LOCK](S)
Keys/Controls
Tuning (M) and Tuning (S)
The Tuning (M) control can be rotated
controls
during your operation with TF-SET.
During the configuration, rotate to scroll
MULTI/CH control
the items you can edit.
[ENT] key
[M.IN] key
Can still be used by pressing and holding
[SCAN] (F5) key
to open the configuration screen.
Can be used while TF-SET is being
operated in VFO mode. Can still be used by
pressing [UP] (microphone) and [DOWN]
[UP] (microphone) and
(microphone) to change a parameter in the
[DOWN] (microphone)
Menu. Can still be used by pressing [UP]
(microphone) and [DOWN] (microphone) to
"Paddle" if it has been configured for Menu
04 (Paddle (Microphone Up/Down Keys)).
[M/V] key
Can be operated only if the main band
[RX] (M) and [RX] (S) keys
frequency is locked.
[TX] (M) and [TX] (S) keys
Band Select Keypad
[M VFO] (F), [M>V]
[M>S] key
[M/S] key
Press and hold while in FM mode to enter
Mode keys
to FM narrow mode.
[FINE] (M) and [FINE] (S)
key
[CW T.] (M) and [CW T.] (S)
[Q.MR] key
[QM.IN] key
Touchscreen Tuning
[UP] and [DOWN]
Can be operated only if the main band
[TRACKING]
frequency is locked.
Remarks
Index
Contents