Connecting To Your Lan - Kenwood TS-990S Instruction Manual

CONNECTING TO YOUR LAN

To connect the transceiver to your LAN so as to automatically correct the clock or to operate with KNS (KENWOOD
NETWORK COMMAND SYSTEM), use an Ethernet cable (straight type) as shown in the illustration below.
{page 15-3} {page 16-12}
Note:
◆ Use a commercially available Ethernet cable.
Internet
Contents Index
Service Provider and Carrier
Ethernet Cable
(Straight Type)
TS-990S
INSTALLING AND CONNECTING THE TRANSCEIVER 1
Broadband Router or Hub
PC 1
Radio Control Program ARCP-990
PC 2
Radio Host Program
ARHP-990
1-9