Automatically Announcing Voice Guidance - Kenwood TS-990S Instruction Manual

14 VOICE GUIDANCE

AUTOMATICALLY ANNOUNCING VOICE GUIDANCE

When voice guidance is enabled, voice guidance is
announced automatically upon the certain operation.
1 Select Group No. 1, "Audio Performance", from the
Menu screen.
2 Access Menu 06, "Automatic Voice Guidance".
3 Press [SELECT] (F4) to enable editing of the
parameter box.
4 Press [–] (F4) or [+] (F5) to select "On".
The default is "Off".
5 Press [ ] (F1).
6 Press [MENU] to exit.
Note:
◆ Press [ ] while pressing down [PF A] when the transceiver power
( ) turns OFF starts up the transceiver power (
Guidance enabled.
If auto voice guidance is enabled, announcement is made
as follows.
Transceiver
Key Operation
Behavior
-
Power ( ) ON
Toggling between
VFO mode and
[M/V]
Memory Channel
mode
[M V]
Memory shift
[M VFO] (F)
Switching to Quick
Memory Channel [MR]
mode
Switching Memory
Rotate the
Channels in
MULTI/CH
Single-band
control.
Memory mode
Switching Memory
Rotate the
Channels in Dual-
MULTI/CH
band Memory
control.
mode
When frequency
is entered with the [ENT]
numeric keypad
Channel number
Pressing the
is entered with the
numeric key
numeric key
Switching Rotate the
frequency entry MULTI/CH
history control.
Switching [LOCK] (M)
frequency lock [LOCK] (S)
Switching mute
[MUTE] (M)
function for
[MUTE] (S)
received audio
Switching split [TX] (S)
operation [TX] (M)
14-2
) with Voice
Announcement
Operating data is announced
regardless of the status of the
configuration screen. Refer to
"Voice 1".
Refer to "Voice 1".
Announces the content in VFO
mode. Refer to "Voice 1".
Announces the content of Quick
Memory Channel mode. Refer to
"Voice 1".
"Channel" + Number + (S/D/P/
blank) + Frequency
No announcement if the Memory
Channel List screen is open.
("Split") + (RX/TX) + "Channel"
+ number + (S/D/P/blank) +
frequency
No announcement if the Memory
Channel List screen is open.
"Enter"
Number
Frequency
"Lock" + (On/Off)
"Mute" + (On/Off)
"Split" + (On/Off)
Transceiver
Key Operation
Behavior
Entering split Press and hold
frequency [TX] (S)
The numeric
Confirming split
keypad or [TX]
frequency
(S)
Changing the Low Rotate the LO/
Cut frequency WIDTH control
Rotate the LO/
Changing width
WIDTH control
Changing the High Rotate the HI/
Cut frequency SHIFT control
Changing shift Rotate the HI/
frequency SHIFT control
Changing transmit Rotate the PWR
power control
Enabling or
disabling the timed [TIMER]
task by a timer
Switching dimmer [DIM]
Switching antenna [ANT] (F)
Selecting band
Band direct key Frequency
direct
Using the
emergency contact [EMERGENCY]
configuration (PF)
frequency
Switching meter [METER] (F)
Note:
◆ Refer to "Voice 1" for the announcement contents currently
displaying the configuration mode.
Announcement
"Split" + "Enter"
"Split" + "TX " + Sub band
frequency
"Low" + frequency
"Width" + frequency
"High" + frequency
"Shift" + frequency
"TX power" + number
"Timer" + (On/Off)
"D" + 1 digit number
"Antenna" + number
"Emergency" + "Frequency"
Analog: (Power/SWR/ID/
Processor/ALC/VD)
"Processor" is announced only if
Processor is enabled.
Digital: (SWR/ID/Processor/VD/
TMP)
"Processor" is announced only if
Processor is enabled.
Mini-digital: (Power/SWR/ID/
Processor/ALC/VD/TMP)
"Processor" is announced only if
Processor is enabled.
{page 14-3}
Index Contents