Kenwood TS-990S Instruction Manual page 34

2 PANEL DESCRIPTION
LO/WIDTH control
High Cut/Low Cut mode: Rotate to adjust the low cut
frequency. {page 6-4}
Shift/Width mode: Rotate to adjust the
bandwidth. {page 6-5}
"SUB" LED (HI/SHIFT LO/WIDTH controls)
Lights orange while the frequency can be changed using the
HI/SHIFT and LO/WIDTH controls.
Notch Filter (Sub band) key: [NCH/SEL] (S)
Press to toggle the Manual Notch Filter for the sub band
between active and inactive.
Press and hold to toggle the Manual Notch Filter bandwidth
for the sub band between normal and wide.
"NCH" (Sub band) LED
Lights green while the manual notch for the sub band is
active. {page 6-11}
Automatic Notch Filter (Sub band) key: [A.NCH/SEL]
(S)
Press to toggle the Auto Notch Filter between active and
inactive.
Press and hold to open or close the Auto Notch Filter screen
for the sub band. {page 6-11}
"A.NCH" (Sub band) LED
Lights green while the Automatic Notch Filter for the sub
band is active.
Band Elimination Filter key: [BEF/SEL] (S)
Press to toggle the Band Elimination Filter for the sub band
between active and inactive.
Press and hold to open or close the Band Elimination Filter
screen for the sub band.
"BEF" (Sub band) LED
Lights green while the Band Elimination Filter for the sub
band is active.
[BC] (S)
Press to cycle the Beat Cancel for the sub band through Beat
Cancel 1, Beat Cancel 2 and Off.
NOTCH SQL (S) control
NOTCH (S) control: Rotate to adjust the notch frequency
while the manual notch filter is active. Rotate to adjust
the center frequency while the band elimination filter is
active. {page 6-10}
SQL (S) control: Rotate to adjust the squelch level for the sub
band. {page 4-8}
NOTCH SQL (M) control
NOTCH (M) control: Rotate to adjust the notch frequency
while the manual notch filter for the main band is active.
Rotate to adjust the center frequency while the band
elimination filter is active.
SQL (M) control: Rotate to adjust the squelch level for the
main band. {page 4-8}
2-8
{page 4-7}
{page 6-10}
{page 6-10}
{page 6-12}
{page 6-12}
{page 6-14}
{page 6-10}
MULTI/CH control
Rotate to increment or decrement the frequency step while in
VFO mode. {page 4-13}
Rotate to increment or decrement the channel number
while in Memory Channel mode or Quick Memory Channel
mode. {page 10-5}
Rotate to show the next or previous parameter while the
menu or a configuration screen appears.
"Multi/Channel" LED
Lights orange when changing the channel number, or when
the configuration item or parameter other than the frequency
is changed.
Tracking key: [TRACKING]
Press to toggle frequency tracking between active and
inactive. {page 5-3}
"TRACKING" LED
Lights green while frequency tracking is active.
Numeric and Band Selection Keypad
[ENT] key
Press to enter an operating frequency using the keypad
(numeric mode). After entering the frequency, press again to
apply the new frequency.
[0 (50)] to [9 (28)]
Press (in numeric mode) to enter a number. Press to enter a
number for the shift frequency while in split mode. Press, as
the band selection key, to select the frequency band.
[GEN1]
Press to select General Coverage Band 1.
[GEN2]
Press to select General Coverage Band 2.
[CLR]
Press to discard an entered value.
{page 5-3}
Index Contents