Interlogix Alliance system User Manual page 52

46 Alliance System
User Manual
Display a user
To display a user, do the following:
1. Press MENU* Figure 1), enter your user
PIN code, and press ENTER Figure 1).
2. Enter 14 (for menu 14) and press ENTER.
The keypad displays the display user
window (Figure 59).
3. Enter 2 and press ENTER to display a user
(Figure 60).
4. Enter the system user number and press
ENTER. The display shows the user's alarm
group (Figure 61).
5. Press ENTER. The display shows the user's
door group (Figure 62).
6. Press ENTER. The display shows the user's
floor group (Figure 63).
7. Press ENTER.
8. If your system is programmed to assign
special user flags to users, the display will
now show the user flags in sequence. See
Create or change a user
flag details.
9. Press ENTER to display the card ID number
(Figure 64).
10. Press ENTER to return to step 1.
on page 47 for user
Figure 59. Display user
1-Delete 2-Display 3-Create
.
Option:
Figure 60. User display number
Display User
Code No:
Figure 61. Display user alarm group
*View, Alm Grp:12,Foreman
Press ENTER
Figure 62. Display user door group
Door Group:2
Press ENTER
Figure 63. Display user floor group
Floor Group:1
Press ENTER
Figure 64. Display user card ID
Card ID:2
Press ENTER