Table of Contents
Advertisement
38
Alliance System
User Manual
Table 19 lists the zone name display options.
Table 19. Zone name display options
Option
Display the remaining zones in the list (if any).
Scroll the list one by one.
Exit menu 9.
Exit the menu option and return to the original display.
System menu option 10, Bypass zone
Use this menu to bypass zones and exclude them from the security system. A zone is bypassed when it is faulty
or broken. By bypassing it, you prevent it causing an alarm until it is fixed. You can also bypass normal zones
if you know their zone numbers.
Note:
A bypassed zone is by default bypassed only until the next disarm of the area to which it belongs.
Bypass a zone
To bypass a zone, do the following:
1. Press MENU* (Figure 1), enter your user
PIN code, and press ENTER (Figure 1).
2. Enter 10 (for menu 10) and press ENTER.
3. The display that appears depends on the
status of the zones.
3a. If no zones are active the display shows
all zones are normal (Figure 39).
3b. If the zones are active the display shows
either a list of zones or one at a time
(Figure 40) or as a list of zone numbers
(Figure 41).
Note:
If the active zones are shown as a list of numbers, it
is not possible to display the name of the zone.
4. Press ENTER to exit menu 4.
Action
Enter the zone number and press ENTER.
Press ON/NEXT.
Press ENTER.
Press CLEAR.
Figure 39. All zones are normal
All Zones are Normal
Bypass:
Figure 40. Active zones listed one at a time
Active On 4, Front Door Contact
Bypass:
Figure 41. Active zones listed by number
Active On 1, 3, 4, 5
Bypass:
Advertisement
Table of Contents
