Condition Check; Turning The Condition Check On Or Off - Benefon TRACK PRO 1.1 Owner's Manual

Condition check

Condition check is a kind of timer, which
provides a periodic check of your activity. If
you do not respond to a check request by
the way you are supposed to respond to it,
the service center will be informed of your
missing or incorrect response. Responding
is defined below, in the chapter Selecting
confirmation.
-
Press to enter the
SELECT
check menu.
Please note that the condition check timer
can also be remote-controlled by the ser-
vice center. In this case, the
shows Remote , which also means, that you
cannot clear or change any other settings
related to the
Condition check
116 MAIN MENU: TELEMATICS
TURNING THE CONDITION CHECK
Before you can activate the condition check
timer, you need to complete the other con-
dition check settings, such as duration, in-
terval and confirm. You may also use the
previous settings if they exist. When you
turn on the function, all these settings will
be sent to the service center as a short mes-
sage.
Condition
As a sign of condition check timer turned
on, the
mode.
Activity setting
Turning the timer on
1. Select
function.
2. Select
3. As a sign of activation, the service center
ON OR OFF
@
-symbol is displayed in stand-by
Activity and press
Activate and press
will send you a confirmation. If the tim-
er is turned on, and reaches the set
time, but the phone is turned off, the
phone will turn on automatically.
-
CHANGE.
-
.
OK