Security Code Request; Change Pin Code - Benefon TRACK PRO 1.1 Owner's Manual

Security code request

The security code is a security code for
telematics functions and settings and GPS
settings. The code is associated with the
phone, not with the SIM card.
If the security code request is set on, you
must key in the code each time, when en-
tering the menu, which is secured by the
code.
-
Press . Use
CHANGE
tion you wish to secure. You can select all
options, some of them, or none of them.
-
Press .
SELECT
The selected option(s) will be marked with
I .
In case you have already marked an option,
which you do not want to secure after all,
highlight that option again and press the
-
right soft key
OFF
options have been marked, move the cursor
to point at Save changes
n
to highlight the op-
. When all the desired
-
and press
OK
Key in the security code. In case of misspell-
.
ing, press
CLEAR
of the cursor. Press

Change PIN code

In this menu you can change the PIN code
on your SIM card.
-
Press
CHANGE.
code, then key in the new code and repeat
the new code by entering it again. Press
after each level.
OK
If the current PIN code matches with the
PIN code stored in SIM card, and the two
new PIN codes match with each other, the
text PIN code changed
When changing the PIN code the PIN code
request must be activated.
.
MAIN MENU: SECURITY
to delete the digits left
-
OK.
Key in the current PIN
will be displayed.
147
-