Select Call; Conference Call - Benefon TRACK PRO 1.1 Owner's Manual

SELECT CALL

Use this function if you wish to switch from
an active call to the held call.
Easiest way to switch between the listed calls is by
2
pressing and right after that
Another way to select a call:
1. First enter the Select call
the Call management
2. All the connected calls are displayed,
whether they are active or on hold. If
you have stored the number in the
phone book, the name will be displayed
instead of the number. If no telephone
number is available, the call is indicated
as Unknown . Two lines of calls is the
maximum.
3. Scroll through the options with
vate the desired call by pressing
The other call will be put on hold.
48 QUICK MENU: OPTIONS DURING A CALL
l
.
menu through
selection list.
n
. Acti-
-
.
OK
If you have received a call, there are two ex-
ceptions when the number of the caller will
not be displayed: if the caller has the CLIR
(Call Line Identification Restriction) feature
in use, or if your network operator does not
supply the CLIP (Call Line Identification
Presentation) feature.

CONFERENCE CALL

Use this function if you wish to combine all
simultaneous calls to a conference call. Us-
ing this function requires, that at least one
of the calls is active and another is put on
hold.
Combine the desired calls together by keying in
l.
and pressing
Another way to make a conference call:
Enter the Conference call
Call management selection list.
Depending on the state of the conference
call, some of the functions are not available
even if you select them.
3
menu through the