Telematics; What To Do First - Benefon TRACK PRO 1.1 Owner's Manual

TELEMATICS

Telematics is a kind of electric data transfer
technique, which can also be used in a wire-
less phone networks. Nowadays, telematics
offers several new services and applica-
tions, such as GPS-positioning (which can
be used e.g. in rescue operations) and dif-
ferent remote-controlled devices (which
can be used e.g. in medical equipment and
emergency and service centers).
-
•Press to enter the
SELECT
menu. Scroll through the sub-menus with
n
.
.
•Press to cancel the operation and
QUIT
return to the previous menu level.
c
•Press to return to stand-by mode. This
can be done at any menu level.
All telematics functions require activation
by the service center. Activation is complet-
ed only after the service center sends you a
confirmation message.
110 MAIN MENU: TELEMATICS
All trackings cannot be turned on at the
same time. E.g. if you use
not use
Please note that if the phone is temporarily
switched off or the battery is removed, the
tracking record (e.g. amount of messages)
will be reset and start from the beginning.
Before you start using the telematics func-
Telematics
tions, also make sure that required telemat-
ics settings are done and essential phone
numbers stored properly in your phone.
Such numbers are:
1. Service center number
mation, please see the chapter Main
menu, Settings, Telematics settings.
2. SMS service number
mation, please see the chapters Main
menu, Settings, Telematics settings,
Protocol settings and Memo, Messages,
Message setup.
Tracking
Area tracking at the same time.

WHAT TO DO FIRST

. For further infor-
. For further infor-
, you can-