Allowing Tracking In Route Points; Login And Logout Messages - Benefon TRACK PRO 1.1 Owner's Manual

ALLOWING TRACKING IN ROUTE
POINTS
1. Select Tracking with
CHANGE.
2. Find the desired option with
-
press .
OK
- Enable: If the route is turned on, and
tracking is enabled, the service center
will be informed of your position
when arriving to a route point. Turn-
ing the route on or off with tracking
enabled is possible only after the ac-
knowledgement (i.e. response) of the
service center.
- Disable: If the route is turned on, but
tracking is disabled, the service center
does not receive position messages of
any kind when entering a route point
area.
120 MAIN MENU: TELEMATICS
n -
and press
n
and

Login and logout messages

By using login and logout messages you can
identify yourself to the service center. The
function is especially useful when the
phone has several users.
The user-id is a four-digit number, which is
supplied to you by the service center.
The entered user-id or enclosed additional
information, such as pager number, duty
number and type, will not be stored in the
phone.
1. Open the Login and logout
-
pressing
SELECT
2. Select either Login
-
press .
SELECT
3. Key in your user-id and press
4. Enclose additional information in free-
form text and press
the text buffer can be left blank, as well.
5. A short message will be sent to the ser-
vice center number informing the ser-
vice center about your login or logout.
menu by
.
n
or Logout with and
-
NEXT.
-
If desired,
SEND.