Benefon Track Pro 1.1 Manual
  1. Manuals
  2. Brands
  3. Benefon Manuals
  4. Cell Phone
  5. TRACK PRO 1.1
  6. Manual

Benefon Track Pro 1.1 Manual

Hide thumbs Also See for Track Pro 1.1:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Owner's Manual
All rights reserved.
© Benefon Oyj, 2002.
BENEFON
TRACK PRO 1.1
Owner´s Manual
Publication number: YZ2630-0
I

Advertisement

Table of Contents
loading

Related Manuals for Benefon Track Pro 1.1

Summary of Contents for Benefon Track Pro 1.1

  • Page 1 BENEFON TRACK PRO 1.1 Owner´s Manual All rights reserved. © Benefon Oyj, 2002. Publication number: YZ2630-0...
  • Page 2 DECLARATION OF CONFORMITY Benefon Oyj Μ ε τ ο π α ρ ό ν η δ η λ ώ ν ε ι ό τ ι α υ τ ό τ ο κ ι ν η τ ό TGP79EE, τ η λ έ φ ω ν ο...

  • Page 3: Quick Guide

    QUICK GUIDE pressing •Call directly to the number last dialled by POWER ON: pressing twice or •Press the top side key for a few sec- •Quick dial the phone number by selecting onds. the memory slot number between 2 and 9 and pressing the corresponding numeric POWER OFF: key for a few seconds or...
  • Page 4 TURNING THE KEYLOCK ON/OFF: QUIET. •In stand-by mode, enter the quick menu ADJUSTING EARPIECE VOLUME: by pressing once, lock the keypad by •You can adjust the earpiece volume pressing Display shows LOCK. during a call by pressing the side keys can only answer a call by pressing •Open the keylock by pressing OPEN...
  • Page 5 3. Press to return to the previous 3. Press QUIT READ menu level. You can return directly to EMPTYING THE SHORT MESSAGE stand-by mode from all menu levels by MEMORY: pressing A flashing envelope ( ) in the display is During a call, menus function the same a sign of error in receiving the latest way as described above.
  • Page 6 C l e a r i n g a p o s t p o n e d m e s s a g e : If you do not want to send anything, do as follows: You have several ways to get rid of a post- poned message.

  • Page 7: Table Of Contents

    CONTENTS Network code........20 Phone code ........21 Security code........21 INTRODUCTION......7 Service center.......21 BENEFON TRACK PRO 1.1....7 Network operator......22 SOME KEY FEATURES ......7 Service provider ......22 About the T9 text input technology........8 OPERATION ......... 23 Display .......... 9 WHAT TO DO FIRST ......23...
  • Page 8 ENDING A CALL .........31 SEND POSITION......... 44 EMERGENCY CALLS......32 ENVIRONMENT ........45 OPTIONS DURING A CALL....45 BENEGUARD-BUTTON ....33 Call management ......46 SOS MESSAGES AND NEW CALL ..........47 PICK UP A WAITING CALL......47 SOS CALLS .........33 SELECT CALL ..........48 ABOUT THE SOS PROCEDURE ....
  • Page 9 PROCESSING THE CALL INFORMATION 63 SENDING AND SAVING THE MESSAGE ......... 88 Call counters ........ 63 Broadcast messages ....91 LAST CALL..........63 RECEIVING A NEW BROADCAST TOTAL CALLS..........63 MESSAGE ........... 92 ALARM CLOCK ........64 READING A BROADCAST MESSAGE ..92 EDITING ALARM SETTINGS .....
  • Page 10 TELEMATICS MENU TREE....109 CAR KIT ENVIRONMENT ......126 NEW ENVIRONMENT ......... 126 TELEMATICS ........110 Power..........127 WHAT TO DO FIRST ........110 POWER ON ..........127 Tracking ........111 POWER OFF ..........127 TURNING THE TRACKING ON OR OFF ... 111 Phone settings......
  • Page 11 Security code request....145 MAX. COST ..........157 COST UNIT..........158 Change PIN code ......146 MONEY LEFT ..........159 Change PIN2 code ....... 146 Network selection......160 Change phone code..... 147 GPS............161 Change network code ....147 Positioning the GPS antenna ..161 Change security code....
  • Page 12 CHARGING ..........171 BICYCLE HOLDER ......180 Charging times ......172 BELT BAG .......... 180 CARE AND MAINTENANCE ....173 APPENDIX........181 DISPOSAL ...........174 CARE AND MAINTENANCE....181 ACCESSORIES ......175 PROBLEMS YOU CAN SOLVE ..181 MAINS CHARGER If the phone will not turn on..181 CMA-70-230 .........175 Blocked SIM card......

  • Page 13: Introduction

    •Mobile Group calls by BeneGuard button This phone is de- (requires third party service) signed for use on •Benefon Mobile Phone Telematics Proto- the GSM (Global Sys- col (MPTP), commands for e.g. position- tem for Mobile Com- ing and tracking, remote configuration...

  • Page 14: About The T9 Text Input Technology

    The high quality Benefon Track Pro 1.1 is which word you are writing. developed and manufactured by Benefon Oyj. Benefon is a company operating world- If there is more than one word possible for wide and specializing in mobile phones.

  • Page 15: Display

    •Select the quick menu by pressing the arrow keys MEMO MENU After the menu is chosen, you may select one of its sub-menus with . Enter the de- sired sub-menu by pressing SELECT. Right soft key Left soft key INTRODUCTION: BENEFON TRACK PRO 1.1...
  • Page 16 Phone book moving direc- tion, which in Recent calls this case is horizontal Alarm clock > In stand-by mode main menu contains Calendar these sub-menus: Calculator Telematics Messages Settings Special services (SIM toolkit) Security Network services INTRODUCTION: BENEFON TRACK PRO 1.1...

  • Page 17: Display Symbols

    SELECT QUIT cannot receive new messages or store messages of your own until deleting Mute some old ones. Hands free (HF) mode INTRODUCTION: BENEFON TRACK PRO 1.1...
  • Page 18 Battery and bar. When the battery is beep sounds when receiving a call. nearly empty the battery symbol will INTRODUCTION: BENEFON TRACK PRO 1.1...
  • Page 19 The type of service will depend on your network operator. The power on timer is turned on. The phone will turn on automatically, at the set time. The power off timer is turned on. The INTRODUCTION: BENEFON TRACK PRO 1.1...

  • Page 20: Keypad

    Soft keys. The function of the soft located on the top of the phone keys depends on the guiding texts on (please see the previous picture). the bottom line of the display. Pressing the SOS button starts the INTRODUCTION: BENEFON TRACK PRO 1.1...
  • Page 21 If you wish to make a direct call to an ISDN the voice messages left for you in your an- sub-number or store the sub-number in swering machine at home. The answering your phone book, key in the string as fol- INTRODUCTION: BENEFON TRACK PRO 1.1...

  • Page 22: Safety And Precautions

    lows: Key in the main phone number, press not use it. § -key three times, (the letter S will be •External alert: The use of the alert displayed) and key in the sub-number. device to operate a vehicle´s lights or horn on public roads is not permitted.

  • Page 23: Radio Frequency (Rf) Energy

    though the magnetic fields of the compo- interference. Only use the phone with nents are weak, they might damage mag- permission and under the instruction of netic cards, such as bank and credit cards. hospital staff. We recommend that you would keep your •Medical devices: Remember that any mobile phone away from magnetic cards.

  • Page 24: Gps

    Telematics protocol •Computers: Remember that using the phone close to a computer may cause MPTP (Mobile Phone Telematic Protocol) interference. When using your phone allows, among other things, tracking of the near such equipment keep a distance of phone over the SMS communication. about one meter.

  • Page 25: Vocabulary

    VOCABULARY PIN code is normally supplied with the SIM card. This vocabulary consists of terms associated Your phone prompts you to enter your PIN with the use of a mobile phone. code when you turn on the phone. You can disable the PIN code request in the security menu, but it is recommended you keep the SIM card...

  • Page 26: Puk Code

    IMEI code abled. You then must use your PUK2 code to enable the PIN2 code and the SIM card. An IMEI (International Mobile Equipment Identity) code is used to identify the mobile phone. You will find your 15-digit IMEI PUK code code easily from the type label of the The PUK code is used to open the disabled phone.

  • Page 27: Phone Code

    Phone code phone prompts you to enter the security code when you enter these functions or set- The phone code (4 - 8 digits) is used to pre- tings. vent the unauthorized use of the phone. If you wish, you can also turn the security The phone code is a security code, which is code request off as well as change the secu- associated with the phone itself, not with...

  • Page 28: Network Operator

    Network operator An organization which maintains a mobile network providing telecommunication con- nections and services. Service provider The service provider is an organization which provides telecommunication services to the users. The service provider can also be a network operator. INTRODUCTION: VOCABULARY...

  • Page 29: Operation

    OPERATION WHAT TO DO FIRST Inserting the SIM card 2. Insert the card into the holder. Check 1. Slide the SIM card holder to the right. that the cut corner is at the lower left Lift the holder into an upright position. side of the holder.

  • Page 30: Fitting The Battery

    Fitting the battery 1. Place the bottom of the battery into the corners at the bottom of the phone. 3. Close the holder by pushing it towards the phone. Slide the holder back to the 2. Push the battery into the phone until it left until it locks.

  • Page 31: Removing The Battery

    Removing the battery Inserting the rubber seal Rubber tab Please note that the phone is water resistant only when the rubber seal is inserted cor- rectly in the phone. Push the release catch downwards and pull the battery carefully away from the rear of Remove the battery.

  • Page 32: Initializing The Phone

    Initializing the phone When you start using the phone for the first time, you should charge the battery first. Please note that the battery will reach its full capacity only after two or three charg- ing times. The standard time (UTC) comes to your Bottom cover phone from a satellite and setting the time requires searching for position (by turning...

  • Page 33: Turning The Phone On

    Turning the phone on 4. The abbreviations of the country and network operator are displayed imme- diately or after the message Searching for networks..Time, date and other symbols may also be displayed if the op- tions are activated in the menu. If you are outside the network’s coverage area the message No service...

  • Page 34: Changing The Language

    Changing the language MAKING A CALL When the menu language is set to Automat- You have several ways to choose the num- , the language is chosen according to your ber you wish to call. SIM card´s language preference. In case the •You can enter the phone number.

  • Page 35: Redialling

    2. Enter the country code, the area code (without the first number), and the 14:12 Hessu phone number. 12:02 Bill 11.08 Jackie 3. Press Delete all QUIT SELECT If the network operator does not imple- ment this function and you try to make a call by using the + character, a message Ille- 1.

  • Page 36: Quick Dialling

    QUICK DIALLING 5. If you wish to remove all the numbers in the redial memory at once, select the option Delete all . Confirm your choice by pressing DELETE. Calling 6. By pressing you enter to the SELECT 987654321 sub-menu where you can make a call to the number, delete or store the num- ber.

  • Page 37: Receiving A Call

    RECEIVING A CALL ANSWERING A CALL •To answer, press . If the Anykey answer When your phone receives a call, it will is set on in the menu, under Settings ring, and the text is shown. Call is coming Call settings , you can also answer by §...

  • Page 38: Emergency Calls

    EMERGENCY CALLS Making an emergency call when the SIM card is inserted ö ö Make an emergency call as a normal phone Emergency call: call: Key in the local emergency number and Insert SIM card press OK or dial number press QUIT MENU...

  • Page 39: Beneguard-Button

    BENEGUARD-BUTTON The SOS procedure can always be started, regardless of the state of the phone: in case a call is in progress and you start the emer- The BeneGuard (i.e. SOS) button gency call, the currently active call will be put on hold.
  • Page 40 choice, the emergency center num- two quick presses or one long press. bers can be short message numbers, For further information, please see the chapters Main menu, Settings, call numbers or both. The decision af- Telematics settings, Emergency set- fects the SOS procedure. For further tings, SOS activation.

  • Page 41: Sos Procedure When Only Sending Short Message

    SOS PROCEDURE WHEN ONLY ling time is e.g. 2 seconds, you have two seconds to press the key to SENDING SHORT MESSAGE < cancel the entire SOS procedure, in- 1. Press the SOS button ( ) on the top cluding sending of the short message. of the phone.

  • Page 42: Sos Procedure When Only Making Call

    SOS PROCEDURE WHEN ONLY 2. At the same time when sending the mes- sage, the phone sends the position in- MAKING CALL < formation. current position 1. Press the SOS button ( ) on the top coordinates are not available, previous of the phone.

  • Page 43: Status Messages

    STATUS MESSAGES If the security code request is turned on, status messages can only be modified by an In order to send status messages, you need authorized person, who knows the code. to configure the phone to be a status The status messages are sent to the pre-de- phone.

  • Page 44: Sending Status Messages

    2. The service center number, to which the status messages will be sent, has Please note that if there are missing service center numbers, false SOS presses, busy telephone lines, been stored correctly in the phone. battery out-of-charge incidents, message transmission errors or poor network coverage, the status message - For further information, please see the might not be sent.

  • Page 45: Mobile Group Calls

    Or, press and hold down the corre- sponding numeric key (1 - 9) for a few SENDING STATUS MESSAGES NUMBERED 10-999 seconds: sending takes place immedi- The rest of the status messages (numbered ately. < 10 - 999) are number codes with no fixed-form text. 1.

  • Page 46: About The Mobile Group Calls

    ABOUT THE MOBILE GROUP CHECK LIST CALLS Make sure that The mobile group call function requires a 1. The phone is configured as a mobile separate contract with the service provider. group phone. The mobile group call is a kind of multipar- - For further information, please see the ty call with the exception that you make a chapter...

  • Page 47: Receiving A Mobile Group Call

    RECEIVING A MOBILE GROUP MAKING A MOBILE GROUP CALL CALL You can answer an incoming mobile group 1: Football team An example of a mobile call normally. Family group menu +358123456789 An incoming mobile group call is answered automatically, if the Automatic answer func- tion is turned on.

  • Page 48: Quick Menu

    QUICK MENU automatically by turning on the option tomatic keylock in the menu, under Settings Phone settings . When the automatic FI NETWORK keylock is in use, the keypad will be locked in approximately 20 seconds if no key is pressed during that time.

  • Page 49: Position Refresh

    3. After locking the keypad, you will return If you press the left soft key or during to stand-by mode automatically. The these 10 seconds, the lights will remain on symbol will be displayed. for another 10 seconds. The lights will turn off 10 seconds after the last key is pressed.

  • Page 50: Send Position

    Press to open the quick menu and position before the sending. For further in- find the Position refresh menu. formation, please see the chapter Quick menu, Position refresh. 2. Press to refresh the position. SELECT 1. Press to enter the Send posi- SELECT 3.

  • Page 51: Environment

    ENVIRONMENT OPTIONS DURING A CALL An environment is a combination of tone During a call, there are several functions and lights settings made suitable for partic- available, depending on the keys pressed. ular situations. For further information Please note that some of these functions de- about editing the environment settings, pend on the services your network operator please see the instructions in chapter Menu,...

  • Page 52: Call Management

    Using functions associated with phone book, messages, recent calls and call costs: callll New call Pick up a waiting call Call management Press and enter the MENU MEMO Select a call Conference call desired sub-menu with SELECT. End call For further information about using these QUIT SELECT SELECT...

  • Page 53: New Call

    NEW CALL PICK UP A WAITING CALL Use this function to make another call dur- When a call is in progress and you have an- ing an active call. The currently active call other incoming call, the network will notify will be put on hold.

  • Page 54: Select Call

    If you do not want to pick up a waiting call, number is available, the call is indicated you may press the left soft key Unknown . Two lines of calls is the DROP. maximum. Please note that in order to use this func- tion, the Call waiting option must be turned...

  • Page 55: Conference Call

    CONFERENCE CALL END CALL Use this function if you wish to combine all Use this function to end a call or calls. simultaneous calls to a conference call. Us- ing this function requires, that at least one • Easiest way to drop a single call from two calls or a of the calls is active and another is put on conference call is by keying in and the number...

  • Page 56: Memo

    MEMO ALPHA KEYS You need the alpha keys for storing and re- calling the information. MEMO •In the traditional spelling mode you get • In stand-by mode, open memo by pressing the first letter of the key when pressing . Use to scroll MEMO PHONE BOOK...
  • Page 57 •When upper case letters are in use the symbol is displayed, in the upper row and when lower case letters are in use the symbol is displayed. The symbol is especially made for writing sen- tences (so that you do not need to switch between the upper case and lower case letters).
  • Page 58 Characters available: Å å Ä ä Æ æ à ß Ç É é è H h I i Ì Mm N n Ñ ñ Ö ö ò Ø ø Ü ü ù Ww X x 0 + . " ' ? ! : - @ * # &...

  • Page 59: Phone Book

    PHONE BOOK ENTER MEMORY ENTER NUMBER ADD NEW PHONE BOOK ENTER NAME: ENTER NAME SLOT NAME LIST: ANNA EDIT ENTER NUMBER ANNA +358123456789 JAKE ENTER NAME DELETE ENTER MEMORY CONFIRM DELETE? SLOT You can store phone numbers in the Phone Press to cancel the operation and QUIT...

  • Page 60: Recalling A Phone Number

    You can NAME LIST also add names in the phone book. The phone book entries are organized in al- +35877400... Add new phabetical order. Benefon Benefon Jagger Jagger You have two ways to enter the name list: Lewis SELECT...

  • Page 61: Editing A Phone Book Entry

    PIN2 code and press slot numbers in the first line. 3. In case you have pressed READ Benefon rectly in the previous menu, the first +3580401234567 line offers you the option Add new [010] 4.

  • Page 62: Deleting A Phone Book Entry

    Editing number preserved. As a result of that, both memory slots will be reserved: one with the original 1. Add numbers by pressing the numeric information and another with the recently keys and remove numbers by pressing stored and possibly modified information. Please note that a long CLEAR empties the whole display.

  • Page 63: Storing A Phone Number

    Storing a phone number KEYING IN A NEW PHONE NUMBER You have several ways to store phone num- bers into the phone book. Enter name: ö You can: 040123456 040123456_ •key in the desired number (please see the NEXT CLEAR SAVE QUIT following instructions)

  • Page 64: Adding A New Number In The Name List

    Add new Enter PIN2 code Benefon 4. Press to store all the new infor- Jagger SAVE mation in the phone book.
  • Page 65 Enter name: Enter memory slot: +3589876543 +3589876543 JULIA JUL_ [020] CLEAR QUIT NEXT SAVE 8. If the phone number just entered is al- ready stored in the phone book, the phone will offer you that name, the number is associated with. If desired, you may edit the name.

  • Page 66: Recent Calls

    RECENT CALLS RECENT CALLS UNANSWERED 14:12 JAKE CALL CALLS ENTER NAME 10:08 +358123456789 SAVE 30.09. MONICA RECEIVED CALLS DELETE ENTER MEMORY SLOT DELETE ALL LAST CALL CALL COUNTERS TOTAL CALLS Unanswered calls This function allows you to keep track of unanswered and received calls.

  • Page 67: List Of Unanswered Calls

    Unanswered calls are detected only when In two cases neither the number nor the the phone is turned on and in the network name of the caller will be displayed: if the coverage area. caller has the CLIR (Call Line Identification Restriction) feature in use, or if your net- work operator does not supply the CLIP LIST OF UNANSWERED CALLS...

  • Page 68: Processing The Call Information

    PROCESSING THE CALL LIST OF RECEIVED CALLS INFORMATION Received calls 14:12 Jake 14:12 Jake Call 12:02 +35898765431 Save 12:02 +35898765431 11.08 Unknown Delete 11.08 Unknown Delete all Delete all QUIT SELECT QUIT SELECT SELECT QUIT SELECT QUIT This received call list contains all the re- By selecting the desired number you will ceived calls.

  • Page 69: Processing The Call Information

    Call counters in these cases your phone counts and dis- plays only one call, which is the last one you Enter the Call counters menu through have received. cent calls menu and press . Scroll SELECT If you wish to delete all the calls displayed the sub-menus by pressing in this list, select the option Delete all...

  • Page 70: Alarm Clock

    ALARM CLOCK ALARM CLOCK SWITCHED OFF ENTER TIME: ALARM: TIME 00:00 DAILY MONDAY ONCE REPEAT DAILY M - F TUESDAY REPEAT SELECTED DAYS WEDNESDAY THURSDAY SNOOZE FRIDAY 5 MIN SATURDAY 10 MIN SUNDAY 30 MIN SAVE CHANGES When the phone is in stand-by mode, open EDITING ALARM SETTINGS by pressing MEMO...
  • Page 71 Selecting repeat alarm By selecting Repeat you can determine, Switched Time 11:22 whether the phone alerts you e.g. every day Repeat Once at the same time. Snooze Switched [On] First select either Once Repeat with QUIT SELECT Press the right soft key If you choose Repeat , you are also able to...
  • Page 72 When ready, scroll down the list and point Save changes . Press Selecting snooze By selecting Snooze you can determine, whether the phone alerts you repeatedly, e.g. in every 10 minutes. Select one of these: 5 min 10 min . Press .

  • Page 73: Calendar

    CALENDAR This is a simplified menu tree of the calendar menu. The obliqued words in the picture show the entered path. CALENDAR SELECT DAY: VIEW A SINGLE EDIT ADD NEW [24.10.00] CALENDAR ENTRY DELETE SUN 23.10.00 VIEW DAY DAY´S SCHEDULE [13:15.00] MON 24.10.00* ADD NEW ENTRY...

  • Page 74: Calendar Options

    Press to cancel the operation and You are also able to add new calendar en- QUIT return to previous menu level. tries for the chosen day or delete unneces- sary entries. Press to return to stand-by mode. This can be done at any menu level. Thu.

  • Page 75: Day´s Schedule

    DAY´S SCHEDULE ADDING NEW ENTRIES View day The date Wed. 6th 10. 1999 Add new entry and its Add new Go to date schedule 11:00 Meeting... View all entries 12:30 Lunch... 15:20 Special br... QUIT SELECT Delete all SELECT QUIT By selecting Add new entry , you can add...
  • Page 76 3. Event: write down the desired text and press . You have space for about NEXT Monday 32 characters, i.e. one and a half lines Set repeat Tuesday Once of text. Wednesday Daily Save changes Selected days QUIT SELECT QUIT SELECT Set repeat Once...

  • Page 77: Editing Or Deletinga Calendar Entry

    EDITING OR DELETING A CALENDAR ENTRY Set alarm: No alarm On time Wed. 6th 10. 1999 Edit 5 min before hh:mm -5 min 10 min before Delete Meeting with Mr. Bean at the movies. 60 min before QUIT QUIT SELECT QUIT SELECT 5.
  • Page 78 Changing repeat When changing repeat you have several op- dd.mm.yyyy Enter date: tions to choose from: you can use repeat hh:mm once, daily, Monday to Friday or on select- Meeting with Mr... Once ed days. dd.mm.yyyy -5 min QUIT QUIT SELECT If you select Selected days...

  • Page 79: Entering The Date To View

    D e l e t i n g o n e c a l e n d a r e n t r y ENTERING THE DATE TO VIEW By selecting Delete you can delete a calen- dar entry. View day Add new entry Confirm your choice by pressing DELETE...

  • Page 80: List Of All Calendar Entries

    LIST OF ALL CALENDAR ENTRIES Please note that if the entry is today, the list item starts with the time. If the entry is not today, list item starts with date. In a case View day like this you need to press to see SELECT Add new entry...

  • Page 81: Calculator

    CALCULATOR The maximum size of a number is 8 digits. When using a decimal point, the amount of In the menu you can perform Calculator digits will be 7 plus the decimal point (for simple mathematical operations, such as example: 123456.7). addition, subtraction, multiplication, and In case you try to key in an illegal mathe- division.
  • Page 82 A n e x a m p l e o f a p e r c e n t In case you prefer using these keys for cal- c a l c u l a t i o n 5 0 + 5 0 - 6 % = 9 4 culating, please check the following table: 1.

  • Page 83: Messages

    MESSAGES READ REPLY 12:17 JULIA MESSAGES INCOMING MESSAGES CALL NUMBER 01.10. JAKE FORWARD DELETE ALL PICK NUMBER DELETE Press SELECT A MESSAGE TEXT... OWN MESSAGES READ to enter the Mes- ANOTHER MESSAGE.. EDIT FORWARD sages menu. DELETE ALL PICK NUMBER DELETE Scroll through the sub-menus and...

  • Page 84: Incoming Messages

    Incoming messages RECEIVING A NEW MESSAGE In this menu you can read or edit the mes- sage or make a call to the sender. You can Incoming messages also send the message back to the sender or [MM] NN New forward it to someone else.

  • Page 85: Recalling Incoming Messages

    RECALLING INCOMING If you wish to delete all the messages dis- MESSAGES played in this list, select the option Delete with and press DELETE. 14:12 Jake 14:12 Jake Confirm your choice by pressing DELETE 12:02 Bill 12:02 Bill 14:12 Jackie 12:02 Jackie again or cancel the operation by pressing Delete all...

  • Page 86: Reading Or Processing An Old Message

    2. After reading the message, when press- Incoming message processing list ing the right soft key, you are able to save the message or delete it immediate- Read ly. Select the desired option with Reply Call number press Forward Pick number 3.

  • Page 87: Sending And Saving The Message

    R e p l y SENDING AND SAVING THE MESSAGE Use this option, if you wish to send the mes- sage back to its sender. This way you do not need to key in the phone number or recall Send and save Send only it from phone book.
  • Page 88 return to previous menu level. The message will not be sent either. In this case you may FORWARDING THE MESSAGE delete some old messages to make some If you wish to send the message to someone else, you are assumed to change the destination number. free memory space or select the Send only 1.
  • Page 89 For further information about sending the •Make a call by pressing CALL. message, please see the instructions in the •Disconnect the call by pressing previous chapter Send and save. F o r w a r d Postpone Use this option if you wish to send the se- By selecting Postpone you can save the mes-...
  • Page 90 the display and right after to return 2. To make a call press QUIT SELECT. to previous menu level. 3. To save the number in the phone book, select the desired option with P i c k n u m b e r press SELECT.

  • Page 91: Own Messages

    Own messages in. Only free memory slots are available. Press SAVE. In this menu you can read, edit and send (i.e. forward) your own, saved messages. D e l e t e You can also pick the phone number of the sender for further use or delete the messag- In this menu you can delete the chosen es either one at a time or all at once.

  • Page 92: Recalling Own Messages

    RECALLING OWN MESSAGES READING OR PROCESSING OWN MESSAGES 1st message starts... 1st message starts... 1. Select one of the messages with 2nd message starts... 2nd message starts... 3rd message starts... 3rd message starts... 2. Press The message process- SELECT. Delete all Delete all ing list will be displayed.
  • Page 93 R e a d You may also modify the text with the T9 (for further information about using the T9 Use this option if you wish to read a mes- text input, please see the instructions in sage. chapter Write message). By pressing , you are able to read the In case you wish to edit or shorten the mes-...

  • Page 94: Sending And Saving The Message

    SENDING AND SAVING 2. (Key in the name or its initials and) THE MESSAGE press READ. 3. Scroll through the numbers with , if Send and save needed. Send Send with position Postpone 4. When the correct number is displayed, press SELECT QUIT...
  • Page 95 F o r w a r d Send with position Use this option if you wish to send the se- By selecting Send with position , you can lected message to a new receiver. Forward- send a message to the operator with a re- ed messages are not stored as extra copies quest for position information (in this case in SIM card.
  • Page 96 P i c k n u m b e r To save the chosen number in the phone book, use and press With this option you can pick the phone LECT. number of the sender and save it in your phone book or make a call to the number in question.

  • Page 97: Broadcast Messages

    Broadcast messages also key it in. Only free memory slots are available. Press SAVE. Cell broadcasts are general messages, which are broadcast to all receivers within a D e l e t e particular region. They may contain adver- tisements, local weather reports and infor- In this menu you can delete chosen mes- mation about road traffic, stock exchange sage from your SIM card.

  • Page 98: Receiving A New Broadcast Message

    RECEIVING A NEW BROADCAST READING A BROADCAST MESSAGE MESSAGE type number Broadcast type number messages type number [MM] NN New SELECT QUIT QUIT READ If you have received a new, unread broad- This broadcast messages selection list con- cast message, the following text is dis- tains all the broadcast messages.

  • Page 99: Message Setup

    Message setup The number must be set correctly, other- wise sending short messages is not possi- Press to enter the Message setup SELECT ble. menu. Scroll through the sub-menus with The currently active setting is shown inside the brackets. If the SMS number displayed In this menu you can store and change the is correct, press to return to the...

  • Page 100: Message Type

    MESSAGE VALIDITY the option Other and store the SMS number into the phone memory. This way you can In this sub-menu you can select the length speed up sending SMS messages when turn- of validity for normal SMS messages, i.e. for ing the power of the phone on.

  • Page 101: Voicemail Number

    VOICEMAIL NUMBER Broadcast message setup You need the voicemail number to listen to Press to enter the Broadcast mes- SELECT the voice messages left for you. The same sage setup menu. Scroll through the sub- number is also used in connection with the menus with function Call diversion...

  • Page 102: Broadcast Message Types

    D e l e t i n g m e s s a g e t y p e base station is displayed as the phone is in stand-by mode. However, all the networks With you can select the numbers of types, do not use the sign.

  • Page 103: Broadcast Message Languages

    BROADCAST MESSAGE D e l e t i n g m e s s a g e l a n g u a g e LANGUAGES English By pressing you can choose, in English SELECT Suomi Suomi which languages you wish broadcast mes- Svenska Svenska Save changes...

  • Page 104: Call Voicemail

    Call voicemail Writing messages In this menu you can: Call voicemail •write new messages Calling.. •edit a postponed message. You have two ways to write messages: You QUIT CALL can use either the T9 mode or the spelling mode. When writing in T9 mode you need to press the key just once to enter the de- In this menu you can listen to the messages sired letter - please note that a single word...

  • Page 105: Writing New Message

    ber the indicator shows. When there is no If you do not have a postponed message, space left, it shows 0. the display is empty and you can start writ- ing a new message immediately. However, please note that if you write a long message (over 160 characters), the If there is a postponed message, the selec- message will be send in several packages...

  • Page 106: Writing Messages With T9 Mode

    WRITING MESSAGES WITH T9 S w i t c h i n g c h a r a c t e r f o r m s MODE § S e l e c t i n g l a n g u a g e QUIT English Suomi...
  • Page 107 L o o k i n g f o r a l t e r n a t i v e w o r d s letter. The maximum amount of characters in one word is 32. A single word takes its form only after you XXXXXx have entered the whole word.
  • Page 108 S a v i n g n e w w o r d s A d d i n g s p e c i a l c h a r a c t e r s The T9 has an automatic saving system, which means it will learn the most frequent words you use, even though they are not used in common language.
  • Page 109 M a k i n g f i n a l c o r r e c t i o n s XXX XXXXX XXXX Xz_ XXXXXXXX XX XXXXXX QUIT QUIT CLEAR SELECT You can read through your message by pressing .

  • Page 110: Writing Messages With Spelling Mode

    SENDING AND SAVING THE You can also switch into the spelling mode (by pressing WRITTEN MESSAGE When the message is ready, press WRITING MESSAGES WITH LECT SPELLING MODE Turn the T9 mode off by pressing When the T9 mode is turned off, there is no Send and save in the display.
  • Page 111 5. Press SEND If there is SMS transmission failure, the text Enter number: Enter number: Error in sending will be displayed. In this Bill case, make sure the receiver´s phone num- +358989999_ +35898765431_ ber (including prefix) and message box SEARCH QUIT CLEAR SEND...

  • Page 112: Special Services (Sim Toolkit)

    SPECIAL SERVICES ordinates). You can save the message with your own messages as well. (SIM TOOLKIT) For further information about sending The services offered through this menu messages, please see the instructions in the item are often informative, such as default previous chapter Send and save.
  • Page 113 •Press to cancel the operation and QUIT return to the previous menu level. •Press to return to stand-by mode. This may happen at any menu level. MEMO: SPECIAL SERVICES (SIM TOOLKIT)

  • Page 114: Main Menu

    MAIN MENU The menu symbols are displayed on the up- per row. Use to scroll through the menus. To choose one of these menus, press the MENU right soft key, e.g. , and you will TELEMATICS SELECT enter the sub-menus of this menu. SETTINGS to scroll through the sub-menus.

  • Page 115: Telematics Menu Tree

    TELEMATICS MENU TREE ACTIVITY TELEMATICS DURATION CONTINUOUS ACTIVATE INTERVAL 0 MIN CLEAR ENTER AMOUNT OF TRACKING ACTIVITY MESSAGES: CONTINUOUS DURATION CONTINUOUS SET AMOUNT OF MSGS ENTER DURATION SET DURATION (DD-HH:MM): SET END TIME INTERVAL 0 MIN ENTER END TIME: ENTER INTERVAL IN MINUTES: ACTIVATE CLEAR...

  • Page 116: Telematics

    TELEMATICS All trackings cannot be turned on at the same time. E.g. if you use Tracking , you can- Telematics is a kind of electric data transfer not use Area tracking at the same time. technique, which can also be used in a wire- Please note that if the phone is temporarily less phone networks.

  • Page 117: Tracking

    Tracking Telematics (functions), Telematics set- tings GPS settings can be secured by a When the tracking function is turned on, security code. If the security code is re- the information of your current position is quired for accessing the menu, key in the regularly sent to the service center.

  • Page 118: Selecting Duration

    As a sign of tracking turned on, the sym- 1. Select Duration with and press bol is displayed in stand-by mode. CHANGE. Find the desired option with Turning the tracking on press to complete the operation. Only one of these options can be turned 1.

  • Page 119: Selecting Interval

    SELECTING INTERVAL Press to enter the Area tracking SELECT menu. The given interval, e.g. 60 minutes, indi- cates that the phone will send your position Area tracking can also be remote-controlled to the service center at intervals of 60 min- by the service center.

  • Page 120: Turning The Area Tracking On Or Off

    TURNING THE AREA TRACKING 3. As a sign of deactivation, the service ON OR OFF center will send you a confirmation. Before you can activate the area tracking, you need to complete the other area track- SELECTING INTERVAL ing settings, such as interval, center point, Select Interval with...

  • Page 121: Selecting Radius

    SELECTING RADIUS tools are also available. For further in- formation about the T9, please see the Select Radius with and press chapter Memo, Messages, Writing mes- CHANGE. sages. Press NEXT. 2. Key in the desired radius in 10 meters. E.g. by entering 20, your actual radius Center point coordinates will be 200 meters.

  • Page 122: Condition Check

    Condition check terval and confirm. You may also use the previous settings if they exist. When you Condition check is a kind of timer, which turn on the function, all these settings will provides a periodic check of your activity. If be sent to the service center as a short mes- you do not respond to a check request by sage.

  • Page 123: Selecting Duration

    3. As a sign of deactivation, the service the phone, not by the service center. Key in the amount of messages. center will send you a confirmation. - Duration: The timer will be on for a pe- riod of time. Key in how many days, SELECTING DURATION hours and minutes you wish the timer You can select, for how long or on what...

  • Page 124: Selecting Confirmation

    in case you ignore phone confirma- SELECTING CONFIRMATION tion, i.e. you fail to press when re- While the condition check timer is on, the quested. phone will send you check requests at reg- ular intervals. Route settings In this menu you can specify the confirma- tion procedure, i.e.

  • Page 125: Turning The Route On Or Off

    TURNING THE ROUTE ON OR OFF 3. As a sign of deactivation, the service center will send you a confirmation. In this menu you can turn on or off an ex- isting route. When the route is turned on, you can follow the route from the GPS nav- ALLOWING TRACKING IN ROUTE igation displays and route point list.

  • Page 126: Login And Logout Messages

    Login and logout messages By using login and logout messages you can identify yourself to the service center. The function is especially useful when the phone has several users. The user-id is a four-digit number, which is supplied to you by the service center. The entered user-id or enclosed additional information, such as pager number, duty number and type, will not be stored in the...

  • Page 127: Settings

    SETTINGS SETTINGS INCOMING CALL NORMAL DISCREET ALARM CALENDAR MESSAGES SILENT CAR KIT VIBRATION ENVIRONMENTS POWER ON TELEMATICS MSGS HANDS FREE NOISY POWER NOTIFICATIONS POWER OFF KEY TONES LIGHTS LANGUAGE PHONE SETTINGS CHANGE NAME DELETE FONT SIZE ANYKEY ANSWER CALL SETTINGS DISPLAY CONTRAST REDIAL MEMORY DATE AND TIME...

  • Page 128: Environments

    in the chapter Operation, Quick menu, En- Settings are divided into several sub-catego- vironments. ries: environments, power settings, phone settings, call settings, telematics settings Environments have default settings, so you and reset default settings. may use them as they are. However, adjust- •Press to enter the Settings...

  • Page 129: Normal Environment

    NORMAL ENVIRONMENT S o u n d s e t t i n g s f o r i n c o m i n g c a l l , a l a r m , c a l e n d a r , s h o r t In this menu you can adjust settings for nor- m e s s a g e s a n d t e l e m a t i c s mal sound environment.
  • Page 130 S e l e c t i n g v i b r a t i n g a l e r t Although names of the tones are sorted in groups, selecting any tone for calls, messag- Vibration can be used along with these es, the calendar and alarm is possible.
  • Page 131 S o u n d s e t t i n g s f o r n o t i f i c a t i o n s •By selecting Automatic , the lights will be turned on automatically when keys are a n d k e y t o n e s pressed or important notifications are The volume has several levels to choose...

  • Page 132: Silent Environment

    SILENT ENVIRONMENT CAR KIT ENVIRONMENT In this menu you can adjust settings for the In this menu you can adjust settings for the silent environment. As a sign of phone be- car kit environment. For further informa- ing totally silent, the symbol shows in tion, please see the instructions in the pre- vious chapter Normal environment.

  • Page 133: Power

    Power Enter time: 23:10 •Press to enter the Power SELECT menu. Scroll through the sub-menus with 11:10pm SELECT QUIT QUIT •Press to cancel the operation and QUIT return to previous menu level. Press to change the time. Key in •Press to return to stand-by mode.

  • Page 134: Phone Settings

    Phone settings tion is not available, English will be set as the default menu language. •Press to enter the Phone set- SELECT If the current menu language is not the one tings menu. Scroll through the sub-menus you wish to use, select the desired language with with and press...

  • Page 135: Display Contrast

    DISPLAY CONTRAST Please note that when setting the date and time initially, the GPS needs to be turned In this menu you can adjust display con- on and the position needs to be read from trast. a satellite. For further information about Press .

  • Page 136: Automatic Keylock

    AUTOMATIC KEYLOCK Please note that if the daylight-saving time is in use in your country, you need to The keypad lock is used to prevent acciden- change the time zone manually each time, tal key strokes. when shifting from winter time to summer time and vice versa.

  • Page 137: Call Settings

    Call settings REDIAL MEMORY If redial memory is turned on, the last di- •Press to enter the Call settings SELECT alled numbers are stored in memory. menu. Scroll through the sub-menus with In this menu you can turn the redial memo- •Press to cancel the operation and ry on or off.

  • Page 138: Dialling Prefix

    answer possible also without an external To turn the option off, select the item HF kit. How hands free works in automatic Press answer depends on the selected environ- Dialling prefix does not affect the emergen- ment and its hands free setting. For further cy call setup routine.

  • Page 139: Telematics Settings

    Telematics settings calls and send SOS messages, status messages cannot be sent and mobile •Press to enter the Telematics SELECT group calls cannot be made. settings menu. Scroll through the sub- •As a status phone. You can make SOS menus with calls, send SOS messages and send sta- •Press to cancel the operation and...

  • Page 140: Emergency Settings

    Please note that in order to send status mes- sec.). sages and make mobile group calls, you Please note that this option is adjustable need to switch the setting each time to cor- only if you have selected the option respond the desired function.
  • Page 141 the phone will go on to the third number in The plain + -characters indicate there are the list and so on. no emergency numbers at all in the list. The phone tries to reach contact with the 1. Press to enter the Emergency SELECT...
  • Page 142 3. Key in the SMS emergency center num- ber, or recall it from the phone book. You can also recall the number from the Phone book assuming it has been stored there. In this case, first Press SAVE. empty the display by pressing .
  • Page 143 emergency center, you can be confident 3. A list of options is displayed: that help is on the way. •By selecting Activate you can turn on this You can also specify the waiting time, i.e. particular environment. Confirm your how long time the phone waits for the con- choice by pressing firmation before trying to reach some other •By selecting...

  • Page 144: Status Messages

    ble as one-way (to the center) or two-way 3. Press (to the center and back to your ear). Please note that if the cancelling time is set Select with and press to zero (0), there is NO possibility to cancel •By selecting Change name , you can...

  • Page 145: Mobile Group Numbers

    MOBILE GROUP NUMBERS tus message when sending it. With the extra note you can, e.g. specify the lo- In this menu you can view, edit, and store cation, you are in. Extra note can be new mobile group numbers. You can form added with the numeric status mes- several mobile groups.

  • Page 146: Service Center Number

    AUTHORIZED NUMBERS not change the original name in the phone book or vice versa.) Press The phone is allowed to send protocol mes- SAVE. sages to the authorized numbers automat- ically. Authorized numbers 6. You can also attach the automatic an- numbers added here in this list and the swer function to the number: Highlight emergency center and service center num-...

  • Page 147: Protocol Settings

    PROTOCOL SETTINGS stored the number in the phone book, you can also recall it from there by •Press to enter the Protocol set- SELECT pressing SEARCH. tings menu. Scroll through the sub-menus with 3. You can scroll the list with •Press to cancel the operation and QUIT...
  • Page 148 reply to the protocol message will be 2. Select the desired option by pressing sent back to the same number. - If the setting is Disabled, the sender of 3. To cancel the operation and return to a protocol message can be anyone, previous menu level, press QUIT e.g.

  • Page 149: Reset Telematics Settings

    The currently active setting is displayed. To If you do not want to change the SMS ser- change the message validity, press vice number, press to return to the QUIT previous menu level. CHANGE Select the new option with and confirm RESET TELEMATICS SETTINGS your choice by pressing Use this option if you wish to restore all...

  • Page 150: Security

    SECURITY ENTER PIN CODE: SECURITY PIN CODE REQUEST ENTER PHONE CODE: PHONE CODE REQUEST TELEMATICS ENTER SECURITY SECURITY CODE REQUEST TELEMATICS SETTINGS CODE: GPS SETTINGS SAVE CHANGES REPEAT NEW PIN ENTER PIN CODE: ENTER NEW PIN CODE: CODE: CHANGE PIN CODE REPEAT NEW PIN2 ENTER PIN2 CODE: ENTER NEW PIN2...

  • Page 151: Pin Code Request

    In the Security menu you can change the se- Key in the PIN code. In case of misspelling, curity codes. You can also determine, press to delete the digits left of CLEAR whether your phone requests a code or not the cursor.

  • Page 152: Change Pin Code

    Change PIN code If the security code request is set on, you must key in the code each time, when en- In this menu you can change the PIN code tering the menu, which is secured by the on your SIM card. code.

  • Page 153: Change Phone Code

    This menu functions as the Change PIN code This menu functions as the Change PIN code menu. menu. If the SIM card inserted does not support the PIN2, the text Feature not available on Change security code will be displayed. The security code is a security code for the telematics functions and settings and the Change phone code...

  • Page 154: Phone Serial Number (Imei)

    When the FDN is turned on in the menu, . Key in the PIN2 code and confirm you can call only to those specific phone the code by pressing numbers which have been stored in the FDN phone book or to those phone num- Phone serial number (IMEI) bers which start with the same number you have stored in the FDN phone book (e.g.

  • Page 155: Network Services

    NETWORK SERVICES NETWORK SERVICES CALL DIVERSIONS DIVERT ALL CALLS TO NUMBER TO VOICE MAIL CHECK DIVERT IF BUSY CLEAR DIVERT IF NO ANSWER BAR ALL OUTGOING CALLS CHECK DIVERT IF NOT CLEAR REACHABLE BAR OUTGOING INT´L CALLS CLEAR ALL BAR INT´L DIVERSIONS OUTGOING CALLS, CALL BARRINGS...

  • Page 156: Call Diversions

    DIVERT ALL CALLS •Press to enter the Network ser- SELECT vices menu. Scroll through the sub- menus with Divert all calls To number •Press to cancel the operation and To voice mail QUIT Check return to previous menu level. Clear QUIT •Press to return to stand-by mode.
  • Page 157 (e.g. Service and to which number the calls are diverted active to Benefon (press As a sign of diverting all calls, an arrow ), will be displayed in the upper part of...

  • Page 158: Divert If Busy

    DIVERT IF BUSY Call barrings The call will be diverted when the phone is In this menu you can bar outgoing and in- busy. This menu functions as the Divert all coming calls. Please note that call barring calls menu. also affects call diversion.

  • Page 159: Bar Outgoing International Calls

    4. When the barring is turned on properly, the text Barring of all outgoing calls ac- Bar all outgoing calls tive will be displayed. Check Clear BAR OUTGOING INTERNATIONAL QUIT SELECT QUIT SELECT CALLS With this option you will bar all outgoing international calls.

  • Page 160: Bar All Incoming Calls

    CLEAR ALL BARRINGS This menu functions as the Bar all outgoing calls menu. With this option you can clear all barrings at once. BAR ALL INCOMING CALLS Press , key in the network code SELECT With this option you can only make calls and press not receive them.

  • Page 161: Call Cost

    Call cost This menu contains information on the call Call cost charges. It also provides options for reset- Last call Total calls ting the charge counter and setting a charge Maximum cost Cost unit limit for calls. These options are useful, es- Money left pecially when the user is not the subscriber.

  • Page 162: Last Call Cost

    LAST CALL COST TOTAL CALLS COST Use this option if you wish to check the cost Use this option if you wish to check the cost of the last call. of all preceding calls including the last call. Counter value for total calls is displayed in currency if you have determined currency and set value for unit price in the Cost unit...

  • Page 163: Max. Cost

    4. If you do not want to reset the counter, press the left soft key until you re- Maximum cost Enter PIN2 code turn to the previous menu level 500.00 MAX. COST QUIT QUIT CHANGE Use this option if you wish to view, set or change the credit limit for total calls.

  • Page 164: Cost Unit

    COST UNIT Charging information is calculated and Max units: stored as charging units. Units are indepen- Maximum call cost limit changed dent of any currency. 600_ Use this option if you wish to read and set CLEAR price for unit. After completing the setting, the call cost information will be displayed in currency instead of units.

  • Page 165: Money Left

    tion. Press Confirm your choice. Enter unit price: Enter currency: Converting the unit of currency may cause minor inaccuracies in the result displayed. 1.000_ FIM_ However, rounding the number does not CLEAR NEXT CLEAR affect counter values, which are stored in units.

  • Page 166: Network Selection

    Network selection work is not available, the list of available networks will be displayed. Select the desired option with and press Network . The phone will register with the cho- Automatic selection Network 1 sen network. Network 2 * Network N Automatic The * indicates that use of the operator is QUIT...

  • Page 167: Gps

    Press SELECT GPS OPERATING enter the GPS menu. GPS SETTINGS MODE Scroll through the ASSISTED GPS RESET POSITION sub-menus with Press to can- QUIT NMEA OUTPUT NAVIGATION cel the operation and AND ROUTE return to the previous CLEAR POSITION menu level. Press to return to VIEW...

  • Page 168: Gps Settings

    The external GPS antenna accessory can be return to previous menu level. used to receive GPS signals even when the •Press to return to stand-by mode. This phone's own GPS antenna is unable to see can be done at any menu level. satellites.

  • Page 169: Assisted Gps (Agps)

    • Full power : You can turn the GPS on to - If the GPS is turned off and you try to send position or send an emergency search for satellites (calculate position) message, the position sent is your old, frequently.

  • Page 170: Nmea Output

    When ready, press - By selecting a transferring speed you SAVE. will turn the NMEA output on. • Number of satellites : Press CHANGE When the NMEA output is turned on, the select with the number of satellites. phone will consume slightly more power. However, please note that the more satel- lites selected, the better the accuracy but the higher the charge.

  • Page 171: Reset Position

    Reset position Navigation and route In this menu you can reset the position in- In this menu you can view route points with formation stored in the phone. Resetting is details in navigation displays. useful if the GPS has trouble reading and Press to enter the Navigation and...

  • Page 172: The Navigation Displays

    THE NAVIGATION DISPLAYS CURRENT DESTINATION (NEXT POINT ON ROUTE) The compass (direction of your movement) Current destination My targ 66,45km Distance to destination Estimated time of arrival 00:32:26 Speed Course to destination 123km/h QUIT PREVIOUS/LATTER ROUTE POINT The compass (direction of your movement) Previous/Latter route point My prev 6,45km...

  • Page 173: Route Point List

    Route point list Press to cancel the operation and QUIT return to the previous menu level. If you have an existing route in your phone and it is activated, all route points will be displayed in this list. Coordinates 1. Press to enter the Route point SELECT...

  • Page 174: Satellite Status

    Satellite status Press to enter the satellite status SELECT The satellite symbol menu. The satellites displayed in this menu indicates the accura- cy of the position, i.e indicate the amount and status of individu- the more bars the al satellites. better position.

  • Page 175: Battery

    BATTERY REMOVING THE BATTERY FITTING THE BATTERY Release catch 1. Place the bottom of the battery into the Push the release catch downwards and pull corners at the bottom of the phone. the battery carefully away from the rear of the phone.

  • Page 176: Battery Types And Sizes

    BATTERY TYPES AND SIZES safety. After cooling off, the phone will function properly. The batteries available for this phone are: Li-Ion At room temperature (+20°C) the •Li-Ion 900 mAh battery loses more than 15% of its capacity in a month. During the first two days the Li-Ion •...

  • Page 177: Mains Charger

    The ideal temperature range for charging is sortment of Benefon accessories. +10°...+30°C. If charging the battery above Other charger types are introduced in the or below these temperatures the life of bat- chapter Accessories.

  • Page 178: Charging Times

    Charging times An empty battery Charging time depends on what kind of a charger and a battery you have in use. E.g. Charging in progress Li-Ion when charging the batteries with the A fully charged quick charger, about 70% of the battery ca- battery pacity will be charged quickly, but charging the remaining 30% takes relatively more...

  • Page 179: Care And Maintenance

    •Only allow service personnel authorised When storing batteries for a long time, it is by Benefon to service your phone. recommended that the batteries are kept cool and fully charged in a dry place. BATTERY: CARE AND MAINTENANCE...

  • Page 180: Disposal

    DISPOSAL Li-Ion batteries do not contain heavy metals Li-Ion which can damage the environment. batteries should be disposed of according to the country-specific regulations. BATTERY: DISPOSAL BATTERY...

  • Page 181: Accessories

    FMC70. sories available for this phone. You may The mains charger should only be used in- also check www.benefon.com for a com- doors. Make sure that the voltage in the plete list of accessories. country which you are staying corresponds to the voltage (230 V) of the charger.

  • Page 182: Cigarette Lighter Charger Ccs-71-12

    CIGARETTE LIGHTER PORTABLE HANDS FREE CHARGER CCS-71-12 EHE70 The portable hands free kit is designed to make the use of the phone easier in various You can charge the phone battery with the working situations. cigarette lighter charger using your vehi- cle’s cigarette lighter.

  • Page 183: Plug-In Hands Free Gma70

    PLUG-IN HANDS FREE Make sure the microphone is placed in an audible position. GMA70 With the plug-in hands free car kit you can also charge the battery of your phone by us- ing your vehicle’s cigarette lighter. LIGHT HOLDER KGC77 The light holder holds your phone steadily in place when you are driving.

  • Page 184: Benewin (Nmea)

    BENEWIN (NMEA) The BeneWin Pro also includes some addi- tional functions, such as settings for maps, routes, and waypoints as well as settings for telematics. It depends on your phone mod- el whether you can use these functions or not. With the data adapter you can connect the phone to a computer and transfer BeneWin- based data between a PC and your phone.

  • Page 185: External Gps Antenna

    EXTERNAL GPS ANTENNA Important: using other than Benefon´s own external antenna break phone´s own GPS antenna or connector. CROSS-COUNTRY ANTENNA The cross-country (power) antenna can be used to replace the regular GSM antenna. It is useful in areas where the GSM network signal strength is weak.

  • Page 186: Bicycle Holder

    BICYCLE HOLDER BELT BAG The belt bag can be used for carrying the phone. The belt bag also protects the phone from impacts. The belt bag can be fastened to e.g. a belt or a backbag for easy carrying. The bicycle holder holds your phone steadi- ly in place on the handlebar of your bicycle so your phone can easily be viewed while riding.

  • Page 187: Appendix

    APPENDIX •Keep the phone dry. Liquids contain min- erals which could corrode electronic cir- cuits. If the phone gets wet, turn it off CARE AND MAINTENANCE and dry the phone and the battery imme- diately. Put the phone into an upright •Dust and dirt may damage the moving position and let it dry.

  • Page 188: Blocked Sim Card

    Blocked SIM card If your phone gets lost If the PIN code has been entered incorrectly Contact your network operator immediate- three times in a row, the PIN code will be ly and let them know the IMEI code to pre- locked.

  • Page 189: If You Cannot Read, Store Or Modify Information In Phone Book

    In any unclear situation, you are always wel- book, please see the chapters Menu, Securi- come to contact your dealer, an authorized ty, Fixed Dialling Numbers (FDN) and Benefon service centre or the network op- Memo, Phone book. erator. Language...
  • Page 190 APPENDIX: PROBLEMS YOU CAN SOLVE...

  • Page 191: Other Character Sets

    This guide includes some additional infor- be mixed in one word or message. mation and specifications applying to the Benefon Track Pro 1.1 phone model sold in some market areas. Other character sets can be used whenever alpha keys are normally available, with...
  • Page 192 Scroll through the selection with and press the corresponding key when the desired character is displayed. § For further information, please see the chapter Latin Memo, Alpha keys in the Benefon Track Pro 1.1 Own- er‘s Manual. Hebrew Cyrlllic Greek QUIT Press and hold for 1-2 sec.
  • Page 193 CYRILLIC CHARACTERS OTHER CHARACTER SETS...

Table of Contents