Broadcast Message Setup; Accept Broadcast Messages; Base Station Id; Broadcast Message Types - Benefon TRACK PRO 1.1 Owner's Manual

Broadcast message setup

-
Press to enter the
SELECT
sage setup menu. Scroll through the sub-
n
menus with .
If you do not want to change these settings,
.
press to return to previous menu
QUIT
level.

ACCEPT BROADCAST MESSAGES

In this menu you can determine, whether
you wish to accept broadcast messages,
such as advertisements, weather forecasts,
traffic reports and sport results.
Currently active setting is displayed. To
change the setting, press
the option on or off with
-
choice by pressing

BASE STATION ID

The base station id indicates the area, in
which your phone is located at the very mo-
ment. If the option is set on, the sign of the
96 MEMO: MESSAGES
Broadcast mes-
-
. Set
CHANGE
n
. Confirm your
OK.
base station is displayed as the phone is in
stand-by mode. However, all the networks
do not use the sign.
Please note that using the base station id
might increase the power consumption.
Set the option on or off as described above .

BROADCAST MESSAGE TYPES

If you have turned on the option
broadcast messages , general messages of
different types can be broadcast to you (de-
pending on your SIM card).
In this sub-menu you can add or delete cer-
tain types of messages, e.g. advertisements,
which you do or do not want to accept.
-
Press to open the broadcast type
SELECT
selection list.
The types of messages are divided into dif-
ferent numbers. In order to find out which
number corresponds certain type of a mes-
sage, please contact your network operator.
Accept