abled. You then must use your PUK2 code
to enable the PIN2 code and the SIM card.
PUK code
The PUK code is used to open the disabled
SIM card. The 8-digit PUK code is normally
supplied with the SIM card.
The SIM card will be permanently disabled
after entering wrong PUK code ten times.
After that only emergency calls can be
made. Contact your network operator for a
new SIM card.
PUK2 code
The PUK2 code is used to open the disabled
PIN2 code. The 8-digit PUK2 code is sup-
plied with the PIN2 code.
In case your PUK2 code gets lost, contact
your network operator.
20
INTRODUCTION: VOCABULARY
IMEI code
An IMEI (International Mobile Equipment
Identity) code is used to identify the mobile
phone. You will find your 15-digit IMEI
code easily from the type label of the
phone.
It is also recommended that you write down
your IMEI code and store it in a safe place.
This will help prevent unauthorized use of
the phone if it gets lost or stolen.
Network code
The network code (4 digits) is supplied by
your network operator.
You need a network code for some sepa-
rately subscribed network services, e.g. call
barring. You can set
Call barring
change the network code in the security
menu.
options and