Tracking; Turning The Tracking On Or Off - Benefon TRACK PRO 1.1 Owner's Manual

The Telematics (functions),
tings and GPS settings
security code. If the security code is re-
quired for accessing the menu, key in the
-
code and press
OK
tion about the code, please see the chapters
Introduction, Vocabulary, Security code
and Main menu, Security, Security code re-
quest and Change security code.
Error in sending
If sending of a protocol message fails, the
phone will send the message later, assum-
ing the protocol message storage is turned
on and there is space left to deposit the
message. For further information, please
see the chapter Main menu, Settings,
Telematics settings, Protocol settings, Mes-
sage storage.
Telematics set-
can be secured by a
. For further informa-

Tracking

When the tracking function is turned on,
the information of your current position is
regularly sent to the service center.
-
Press to enter the
SELECT
menu.
Tracking can also be remote-controlled by
the service center. In this case, the
setting shows Remote
that you cannot clear or change any settings
related to the Tracking
TURNING THE TRACKING ON OR
OFF
Before you can activate the tracking, you
need to complete the other tracking set-
tings, such as interval and duration. You
may also use the previous settings if they
exist. When you turn on the function, all
these settings will be sent to the service
center as a short message.
MAIN MENU: TELEMATICS
Tracking
Activity
, which also means
function.
111