Condition Check; Turning The Condition Check On Or Off - Benefon Track Pro 1.1 Manual

Condition check

Condition check is a kind of timer, which
provides a periodic check of your activity. If
you do not respond to a check request by
the way you are supposed to, the service
center will be informed of your missing or
incorrect response. Responding is defined
below, in the chapter Selecting confirma-
tion.
-
Press to enter the
SELECT
check menu.
Please note that the condition check timer
can also be remote-controlled by the ser-
vice center. In this case, the
shows Remote , which also means, that you
cannot clear or change any other settings
related to the
Condition check
TURNING THE CONDITION CHECK
ON OR OFF
Before you can activate the condition check
timer, you need to complete the other con-
dition check settings, such as duration, in-
116 MAIN MENU: TELEMATICS
terval and confirm. You may also use the
previous settings if they exist. When you
turn on the function, all these settings will
be sent to the service center as a short mes-
sage.
As a sign of condition check timer turned
on, the
mode.
Turning the timer on
Condition
1. Select
2. Select
Activity setting 3. As a sign of activation, the service center
function.
Turning the timer off
1. Select
2. Find
@
-symbol is displayed in stand-by
Activity and press
Activate and press
will send you a confirmation. If the tim-
er is turned on, and reaches the set
time, but the phone is turned off, the
phone will turn on automatically.
Activity and press
n
Clear with and press
-
CHANGE.
-
.
OK
-
CHANGE.
-
.
OK