Removing The Battery; Inserting The Rubber Seal - Benefon TRACK PRO 1.1 Owner's Manual

Removing the battery

Push the release catch downwards and pull
the battery carefully away from the rear of
the phone.

Inserting the rubber seal

Cap
Please note that the phone is water resistant
only when the rubber seal is inserted cor-
rectly in the phone.
Remove the battery.
1. Place the rubber seal so that it lies in the
bottom of the battery hole (see the pic-
ture above).
2. Fit the rubber tab into the recess in the
upper left corner.
OPERATION: WHAT TO DO FIRST
Rubber tab
25