Telematics Settings; Primary Use Of Emergency (Sos) Button - Benefon TRACK PRO 1.1 Owner's Manual

Telematics settings

-
•Press to enter the
SELECT
settings menu. Scroll through the sub-
n
menus with .
.
•Press to cancel the operation and
QUIT
return to previous menu level.
c
•Press to return to stand-by mode. This
can be done at any menu level.
Telematics settings menu can be secured by
a code. If the security code is required for
accessing this menu, key in the code and
-
press . For further information,
OK
please see the chapter Main menu, Securi-
ty, Security code request.
PRIMARY USE OF EMERGENCY
(SOS) BUTTON
You can select the primary use of the Bene-
Guard button, i.e. emergency (SOS) button
( ) . The phone can be used in several
<
ways:
•As a SOS phone.
- You can only make SOS calls and
Telematics
•As a status phone.
- You can make SOS calls, send SOS
•As a mobile group phone.
- You can make SOS calls, send SOS
send SOS messages, status messages
cannot be sent and mobile group calls
cannot be made.
messages and send status messag-
es. In this case SOS calls/messages
will always be started by pressing the
emergency button for a few seconds
and status messages will always be
sent by pressing the emergency but-
ton quickly - despite the selected SOS
activation.
messages and make mobile group
calls. In this case SOS calls/messages
will always be started by pressing the
emergency button for a few seconds
and mobile group calls will always be
made by pressing the emergency but-
ton quickly - despite the selected SOS
activation.
MAIN MENU: SETTINGS 133