Table of Contents
Advertisement
INFORMATION menu
INQUIRY DISP
The INFORMATION menu includes the commands listed below:
• INQUIRY DISP (page 36)
• SERIAL DISP (page 37)
• BARCODE DISP (page 37)
• ERROR LOG DISP (page 38)
• LIFE LOG DISP (page 39)
• LOAD CNT DISP (page 40)
• NETWORK (page 40)
This command is used to display Vendor IDs, Product IDs and Revisions of the
firmware.
Press the "Enter" button when the command menu is displayed, and the LCD
panel display changes as follows. The library is now in Command execution
mode.
LIBRARY
CSM-20
LIBRARY
SONY
Rev0100
Display
Upper line: Shows a device that is presently selected.
Lower line: Shows Product ID, Vendor ID and Revision of the firmware that
is presently selected.
The information is shown in the following order: Library (Product
ID) → Library (Vendor ID, Revision) → Drive 1 (Product ID) →
Drive 1 (Vendor ID, Revision) → Drive 2 (Product ID) → Drive
2 (Vendor ID, Revision).
Button Operations
"Up" button:
Displays the information of the next device.
"Down" button:
Displays the information of the previous device.
"Enter" button:
No associated function.
"Cancel" button:
Returns to the command menu.
36
Chapter 4 Commands
Advertisement
Table of Contents
