Table of Contents
Advertisement
CTG INVENTORY
Button Operations
"Up" button and "Down" button: No associated function.
"Enter" button:
"Cancel" button:
This command is used to detect whether any media is set in store elements and
data transfer elements and display the status result. Make sure to execute the
command every time when you manually insert media into the elements or eject
it from the elements and update the media information on the library.
Press the "Enter" button when the command menu is displayed, and the LCD
panel display changes as follows. The library is now in Command execution
mode.
1
2
3
4
5
*
-
-
*
*
Display
Upper line: Displays the address numbers of elements.
1-20:
Store element addresses
D1, D2: Drive 1 and Drive 2 (Data transfer element addresses)
IE:
Import/Export element address
MT:
Picker assembly element address
Lower line: Displays the status of media in each element.
*:
Media is inserted.
-:
No media is inserted.
Blank: There is no element (No magazine is installed).
Button Operations
"Up" button:
Displays the next group of element addresses.
"Down" button:
Displays the previous group of element addresses.
"Enter" button:
Executes an operation to detect the media status.
"Cancel" button:
Returns to the command menu.
The command performs a mechanical adjustment to detect the status of media
in all elements (It may take several minutes for detection).
•
When the command ends normally
The following display appears.
CTG INVENTORY
COMPLETED
•
When the command ends abnormally
The following display appears.
CTG INVENTORY
ERROR * * / * *
* *
No associated function.
Returns to the command menu.
Chapter 4 Commands
42
Advertisement
Table of Contents
