Table of Contents
Advertisement
Operation Modes
ON LINE Mode
USER Mode
This section presents detailed explanations about the ON LINE and USER
modes.
When the device starts, it enters ON LINE mode and "<<<ON LINE>>>"
appears on the LCD panel.
When there is no error with the library and drives, the following information
usually appears:
<<<ON LINE>>>
ON STANDBY CP=20
LCD Panel Display
Upper line: Displays the current operation mode is ON LINE mode.
Lower line: Displays the picker position is in front of slot 20.
Operations
"UP" button:
Confirms the switching to USER mode.
"DOWN" button:
No associated functions.
"ENTER" button:
No associated functions.
"CANCEL" button:
No associated functions.
LED Display
POWER:
Green, lit
ERROR/WARNING: Off
Notes
For information about other display in ON LINE mode, refer to chapter 5,
"Displays in ON LINE Mode" (page 61).
When the device is in USER mode, you can use the buttons below to perform
operations.
<<USER>>
*
INFORMATION
LCD Panel Display
Upper line: Displays the current mode.
Lower line: Displays the menu.
There are the following three menus for USER mode.
INFORMATION:
Displays Inquiry and Serial Number.
OPERATION:
Performs some commands including REZERO UNIT.
CONFIGURATION: Sets up SCSI IDs and passwords.
24
Chapter 3 Operation
Advertisement
Table of Contents
