Table of Contents
Advertisement
Overview
Unpacking
Installation
This chapter describes the general procedures for positioning the S-AIT library,
connecting it to the host computer, and turning it on. This chapter also describes
initial setup. Installation and setup procedures may vary slightly depending on
your system.
Caution
With a single drive installed, the S-AIT library weighs approximately 27 kg/
59.5 lbs. At least two people are needed in order to handle the library. Handling
the S-AIT library on your own could result in back injury or other accidents
resulting in injury or damage to the S-AIT library.
Note
You will need the box and packing materials if you wish to move or transport
the unit. Retain them for future use.
1
Remove the unit from the box as indicated below.
Remove the packing materials, such as plastic covers and tapes.
2
Chapter
Chapter 2 Installation
15
Advertisement
Table of Contents
