Table of Contents
Advertisement
MAGAZINE XCHG
This command is used to exchange magazines.
Press the "Enter" button when the command menu is displayed, and the LCD
panel display changes as follows. The library is now in Command execution
mode.
MAGAZINE CHANGE
Push ENTER Key.
Button Operations
"Up" button and "Down" button: No associated function.
"Enter" button:
"Cancel" button:
OPEN PANEL
FR: *
ML: *
MR: *
Display
FR:
Displays the status of front panel (*: Closed -: Opened).
MR: Displays the status of the right magazine (*: Magazines are placed, -: No
magazines are placed).
ML: Displays the status of the left magazine (*: Magazines are placed, -: No
magazines are placed).
Button Operations
"Up" button and "Down" button: No associated function.
"Enter" button:
"Cancel" button:
If the front panel is not opened at this moment, the library returns to the
command menu in about 30 seconds.
When the front panel is opened, the following screen appears.
CHANGE MAGAZINE
FR: -
ML: *
MR: *
Display
FR:
Displays the status of front panel (*: Closed, -: Opened).
MR: Displays the status of the right magazine (*: Magazines are placed, -: No
magazines are placed).
ML: Displays the status of the left magazine (*: Magazines are placed, -: No
magazines are placed).
Button Operations
"Up" button and "Down" button: No associated function.
"Enter" button:
"Cancel" button:
You can now replace magazines.
When you close the front panel after replacing magazines, the library goes to the
next screen depending on the status of magazine replacement.
Unlocks the front panel and then moves to the
next screen (You can now open the front
panel).
Returns to the command menu.
No associated function.
Returns to the command menu.
No associated function.
No associated function.
Chapter 4 Commands
47
Advertisement
Table of Contents
