Table of Contents
Advertisement
ERROR LOG DISP
This command is used to display 100 latest error logs that occurred in the
library.
Press the "Enter" button when the command menu is displayed, and the LCD
panel display changes as follows. The library is now in Command execution
mode.
ERROR LOG DISP
LIB ERROR LOG
Display
Lower line: Displays the devices (LIB:LIBRARY, DRV1:DRIVE1,
DRV2:DRIVE2).
Button Operations
"Up" button:
Displays the next device.
"Down" button:
Displays the previous device.
"Enter" button:
Displays an error log for the selected device.
"Cancel" button:
Returns to the command menu.
ERR 001=94/EE/00
TIME = 152300
Display
Upper line: Displays the code of error that occurred.
ERR 001:
• In the above example, 94/EE (Media Jumping Error) is the error
code.
• 001 is the latest error while Error 100 is the oldest error.
Lower line: Displays the time when the error occurred (by the second)
(cumulative amount of time (second) from the moment when the
library is powered on).
Button Operations
"Up" button:
Displays the next error.
"Down" button:
Displays the previous error.
"Enter" button:
No associated function.
"Cancel" button:
Returns to the command menu.
AA/BB/CC
AA: Additional Sense Code (Same as SCSI
ASC).
BB: Additional Sense Code Qualifier (Same as
SCSI ASCQ).
CC: Additional Error Code (values for debug)
38
Chapter 4 Commands
Advertisement
Table of Contents
