Sony csm-20s Operating Instructions Manual page 80

ERROR CODE
ASC ASCQ
5B 01 THRESHOLD CONDITION MET
The comparison of set value/accumulated
value of life parameter and log parameter have
met with the specified state.
5B 02 LOG COUNTER AT MAXIMUM
Accumulated value of log parameter is now at
maximum.
80 00 MEDIUM REMOVAL PREVENTED
Removing cartridges are not allowed.
80 18 MAGAZINE#1 IS OPEN
There is no magazine on the left.
80 19 MAGAZINE#2 IS OPEN
There is no magazine on the right.
80 71 ACCESS DOOR IS OPEN
The front panel has not been locked.
MAIL SLOT IS OPEN
80 7B
The shutter of the mail slot (import/export slot)
is open.
81 00 MEDIUM PRESENT IN DRIVE
Because cartridges have not been ejected, it is
invalid to remove them from the drive.
84 00 COMMAND SEQUENCE ERROR
A command sequence error occurred.
90 14 I/E ELEMENT FORWARDING ERROR
A moving-forward error occurred in the import/
export element.
90 15 I/E ELEMENT BACKWARDING ERROR
A moving-backward error occurred in the
import/export element.
91 20 PICK MEDIUM ERROR
An error occurred when the cartridge was being
shipped from the store slot to the picker
assembly element.
91 23 STORE MEDIUM ERROR
An error occurred when the cartridge was being
ejected from the picker assembly element to
the store slot.
91 30 MEDIUM UNLOADING ERROR AT DRIVE
An error occurred when the cartridge was being
shipped from the drive to the picker assembly
element.
MEDIUM LOADING ERROR AT DRIVE
91 32
An error occurred when the cartridge was being
inserted from the picker assembly element to
the drive.
SWING ERROR
92 50
An error occurred during the swing operation of
the picker assembly element.
93 E9 LOGICAL UNIT MEMORY ERROR
Internal memory is unusual.
DESCRIPTION SENSE KEY
UNIT
ATTENTION
UNIT
ATTENTION
ILLEGAL The option of cartridge removal is
REQUEST presently set to PREVENT.
Perform the PREVENT/ ALLOW
MEDIUM REMOVAL command to permit
you to remove cartridges.
HARDWARE A magazine is not set on the left.
ERROR Insert the left magazine.
HARDWARE A magazine is not set on the right.
ERROR Insert the right magazine.
NOT READY The library cannot be set to the standby
state because the front door is open.
Close the front door.
NOT READY
ABORTED
COMMAND
ABORTED
COMMAND
HARDWARE Contact the Service and Support Center.
ERROR
HARDWARE Contact the Service and Support Center.
ERROR
HARDWARE Contact the Service and Support Center.
ERROR
HARDWARE Contact the Service and Support Center.
ERROR
HARDWARE Contact the Service and Support Center.
ERROR
HARDWARE Contact the Service and Support Center.
ERROR
HARDWARE Contact the Service and Support Center.
ERROR
HARDWARE Contact the Service and Support Center.
ERROR
To Recover
80
Appendix