Setting The Temperature; Setting Water Hardness; Setting The Language; Beep - DeLonghi ECAM45.32X Instructions For Use Manual

Please note!
• When in energy saving mode, a few seconds may elapse
before the first coffee is delivered as the appliance must
heat up again.
• To prepare any drink, press any button to exit energy sa-
ving, then press the button corresponding to the drink you
want to make.

Setting the temperature

To modify the temperature of the water used to make the coffee,
proceed as follows:
1. Press the MENU/ESC button to enter the menu;
2. Press < or > (fig. 9) until "Set temperature" is displayed;
3. Press the button;
4. Press < or > until the required temperature (●=low;
●●●●=maximum) is displayed;
5. Press the button to confirm;
6. Then press the MENU/ESC button to exit the menu.

Setting water hardness

For instructions on setting water hardness, see page 17.

Setting the language

To modify the language of the display, proceed as follows:
1. Press the MENU/ESC button to enter the menu;
2. Press < or > (fig. 9) until "Set language" is displayed;
3. Press the button;
4. Press < or > until the required language is displayed;
5. Press the button to confirm;
6. A message confirming the language installed is displayed;
7. Then press the MENU/ESC button to exit the menu.

Beep

This enables or disables the beep emitted by the appliance whe-
never a button is pressed or an accessory is inserted/removed.
To disable or re-enable the beep, proceed as follows:
1. Press the MENU/ESC button to enter the menu;
2. Press < or > (fig. 9) until "Beep" is displayed.
3. Press the button: "Disable?" is displayed (or "Ena-
ble?" if disabled);
4. Press the button to enable or disable the beep;
5. Press the MENU/ESC button to exit the menu.

Default values (reset)

This resets all menu settings and programmed quantities back
to the default values (with the exception of the language which
remains as set).
To reset the default values, proceed as follows:
1. Press the MENU/ESC button to enter the menu;
2. Press < or > (fig. 9) until "Default values" is displayed;
3. Press the
4. "Confirm?" is displayed;
5. Press the

Statistics function

This displays statistics relating to the machine.
To display, proceed as follows:
1. Press the MENU/ESC button to enter the menu;
2. Press < or > (fig. 9) until "Statistics" is displayed;
3. Press the
4. Press < or > (fig. 9) to verify:
- how many coffees have been made;
- the total number of litres of water delivered.
- how many times the machine has been descaled.
- how many times the water softener filter has been
replaced.
5. Press the MENU/ESC button twice to exit the menu.

MAKING COFFEE

Selecting the coffee taste

The appliance is set by default to make coffee with a standard
taste.
You can also choose one of these tastes:
Extra-mild taste
Mild taste
Standard taste
Strong taste
Extra-strong taste
To change the taste, press the
tedly until the required taste is displayed.

Selecting the quantity of coffee in the cup

The appliance is set by default to make a standard quantity of
coffee. To select the quantity of coffee, press the
button (fig. 11) until the message corresponding to the required
quantity of coffee is displayed:
Coffee selected
MY COFFEE
SHORT
STANDARD
LONG
EXTRA LONG COFFEE
11
button;
button to confirm and exit.
button;
button (fig. 10) repea-
Quantity in cup (ml)
Programmable:
from ≃20 to ≃180
≃40
≃60
≃90
≃120