Troubleshooting; Care Of Your Product - Blaupunkt CR7BK User Manual

CR7BK
1. Turn on the radio and select a radio station you like to memorize.
2. Press and hold the SET until MEM LED appears and "01" flashes. Press SET once
to store Memory 1.
3. Press or
hold SET until MEM LED appears and "01" flashes. Press
appears. Press SET once to store Memory 02.
4. Repeat Step 2 to 3 to preset memories 3 through 10.
5. To access a preset station at any time, simply press the SET once at a time while
the radio is on.
6. To edit a preset station, select another station and then repeat Step 2 to 4. This
overrides the original settings.
USING THE SLEEP TIMER
1. Press the RADIO/SLEEP twice to enter the sleep mode. The SL (SLEEP) LED and the
sleep time "05" (5 minutes) and will flash on the display.
2. Press the RADIO/SLEEP again as needed to adjust the sleep timer from 5,15, 30, 45,
60, 75, 90 or OFF.
3. When the display changes back to show the time, simply press the RADIO/SLEEP
twice to show the sleep time remaining.
4. The radio will play for the programmed sleep time and then turn off automatically.
5. To turn off the radio before the sleep time has elapsed, press
TROUBLE SHOOTING
If your clock displays irrelevant time or does not function properly, which maybe caused
by electro-static discharge or other interference, unplug the DC jack to disconnect the AC
power (and remove the backup battery). The clock radio will be reset to default settings
and you need to set it again.

CARE OF YOUR PRODUCT

1. Place your clock radio on a stable surface, away from sources of direct sunlight or
excessive heat or moisture.
2. Protect your furniture when placing your units on a natural wood and lacquered
finish by using a cloth or protective material between it and the furniture.
3. Clean your unit with a soft cloth moistened only with mild soap and water.
Stronger agents such as Benzene, thinner or similar materials can damage the
surface of the unit. Make sure the unit is unplugged before cleaning.
4. If the unit is not to be used for a prolonged period, such as a month or longer,
remove the batteries to prevent possible corrosion. Should the battery
compartment become corroded or dirty, clean the compartment thoroughly and
replace the batteries.
to select another station you like to memorize. Then press and
8
or once, "02"
once.