Cisco TelePresence MX800 Dual Replacement Manual page 41

Cisco TelePresence MX800 Dual
Contents
Replace monitor (wall mounted)
Step 7: Remove all cables
All cables that were shipped with the system
remain in your property and should not be
returned to the supplier.
You will not receive new cables with the
replacement part.
Only remove cables for the monitor that you
are replacing.
For reconnecting the cables, refer to cabling details
in the Cable schema and Spare part list on our web
site. Go to http://www.cisco.com/go/mx-docs
select Maintain and Operate Guides.
D15327.01 MX800 Dual Replacement Guide, MAY 2015.
Introduction Grilles and covers
(page 5 of 8)
From codec connector panel
and
Power
Speakers and cameras
www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved.
41
Replacement Guide
Codec and monitors Codec and monitors Appendix
From codec, camera,
loudspeakers and right monitor
From codec, loudspeakers
and left monitor
From PoE injector